This post is more than 5 years old
4 Posts
0
2968
Exchange backup's Failing
Good Morning All...
i am new to networker and storage so please help me here i am having some issue where backup of exchange server failing with below error message
APPLICATIONS:\Microsoft Exchange 2010: Backup of [APPLICATIONS:\Microsoft Exchange 2010] failed
optype: conventional;
snap_id_list_1: NetWorker Module for Microsoft Applications,
Microsoft Volume Shadow Copy Service;
snap_sessionid: 1477576793;
NMM .. Starting Backup. This operation may take a long time depending on the size of the data requested.
102019:nsrsnap_vss_save:NMM .. The rollover failed with error 'Traditional save returned error. saverc :1'. Refer to the PowerSnap logs for more information.NMM .. Error backing up one or more of the file system savesets: NMM .. Operation unit failed with error Traditional save returned error. saverc :1.
64038:nsrsnap_vss_save:NMM .. Error creating NetWorker backup of snapshot: NMM .. Operation unit failed with error Traditional save returned error. saverc :1.
63372:nsrsnap_vss_save:NMM .. Registration of snapshot set failed -- NMM .. Operation unit failed with error Traditional save returned error. saverc :1
77175:nsrsnap_vss_save:NMM .. completed commit replica with status of false.
Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: ????????(Exchange Server name)
Automatic mounting of new volumes enabled.
37959:nsrsnap_vss_save:An internal error occurred.
.
63335:nsrsnap_vss_save:NMM backup failed to complete successfully.
Internal error.
102333 1477577033 3 0 0 5996 8516 0 ????????????????????(Exchange Server name) nsrsnap_vss_save NSR error 21 Exiting with failure. 0
Best Regards
sukhigrwl
4 Posts
0
October 28th, 2016 06:00
Good Morning Carlos:
thanks for your reply but i am able to help this issue yesterday with help of EMC Support (Julian Paul) and issue was one its have mount folder pointing to unknown drive which not exist in exchange server or somehow got deleted.
Second Service account used for net worker missing two Active Directory group named
Organization Management
Exchange Servers
so fixing all above solved my issue and once again exchange backups flying smoothly
best Regards
Sukhdeep
CarlosRojas
1.7K Posts
0
October 28th, 2016 02:00
Hi sukhigrwl
This appears to be a TCP/IP timeout.
Please apply the following settings on the Exchange nodes as well as NetWorker server:
1.- Group Inactivity Timeout is set to "0" in the Exchange client configuration in NMC.
2.- Add the TCP/IP settings on regirtry (DWORD Decimal values):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\TcpWindowSize=256000
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\GlobalMaxTcpWindowSize=16777216
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveInterval=1000
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime=600000
On Solaris:
#ndd -get /dev/tcp tcp_keepalive_interval
7200000
#ndd -set /dev/tcp tcp_keepalive_interval 3360000
TCP settings on Windows 2008 R2:
netsh int tcp set global chimney=disabled
netsh interface tcp set global dca=enabled
netsh interface tcp set global netdma=enabled
netsh interface tcp set global autotuninglevel=highlyrestricted
netsh interface tcp set global congestionprovider=ctcp
netsh interface tcp set global ecncapability=disabled
netsh int tcp set global rss=disabled
I would recommend to reboot after these settings are applied.
Thank you,
Carlos