Unsolved
This post is more than 5 years old
15 Posts
0
62393
PE 2650 with error code E0212
Hi techs!
I have a new Dell PE 2650 that flashes the following error on boot:
"E0212 VOLT ROMB BATT"
What is the cause of this error, and how can it be rectified. I am running Win2K3 on the new server.
Cheers!
Aguambo
DELL-Mark A
2.5K Posts
0
September 9th, 2003 12:00
Hi Aguambo,
The first step in diagnosing voltage errors is to ensure the system has all the latest System Upgrades and Management Software installed.
System BIOS, PowerEdge 2650, A15
FileName: PE2650-BIOSA15.exe [637 KB]
Release Date: 7/16/2003
ESM Firmware, PowerEdge 2650, A02
Filename: fwsBPa02.exe [112 KB]
ERA and DRACIII/XT, Firmware, v.2.50, A01
FileName: d_0721v250_bma.exe [2 MB]
Release Date: 8/28/2003
Dell OpenManage Server Administrator and Remote Install (Agent), Windows 2000, Windows Server 2003, v.1.5, A00
FileName: om35_win_managed_system_A00.exe [138 MB]
Release Date: 8/29/2003
Server Administrator Documentation:
wgeis
1 Message
0
December 10th, 2004 19:00
I'm having this same problem with the same circumstances, 2650 with server 2003.
What is the second step?
Ward
BobatEPM
1 Message
0
May 13th, 2005 18:00