1 Rookie
•
111 Posts
0
1145
ps4210 (ps4200 series) mange system via html5 or something else instead of java
Hi there,
since its very annoying to manage the ps4210 via java I wanted to ask if there is a way to mange the PC4210 via HTML5 or anything else except java (since we also wanna get rid of java in the company).
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
1
February 21st, 2022 04:00
Hello,
You are welcome. As the product is end-of-life there is no development of new features. Also a webserver and HTML GUI would require significant resources that would impact array performance.
If you have SANHQ installed that would allow you to do a lot of monitoring of the group without need the Group Java GUI.
Regards,
Don
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
1
February 18th, 2022 06:00
Hello,
No, there is no alternative GUI to manage EQL arrays. The webserver on the arrays is only there to provide the Java applet.
You can manage the group from the Group CLI.
Regards,
Don
White_Ninja
1 Rookie
1 Rookie
•
111 Posts
0
February 20th, 2022 21:00
Hey thanks,
thats a pity. maybe they can put it on the wish list for a new firmware.
White_Ninja
1 Rookie
1 Rookie
•
111 Posts
0
February 25th, 2022 01:00
hi and thanks....sounds like i will have to re-enable the san-hq, will be most helpful who are not that familiar with ps4000 if they are on standy-by
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
0
February 25th, 2022 17:00
Hello
You are most welcome. Also, with SANHQ you can enable Support Assist. Which can automatically create a case if a HW failure is detected. Additionally, you can enable sending of performance data. The benefit of this is when you have a case, historical data from your group is available. This combined with exporting a SANHQ archive can really assist in triage. Especially, performance issues.
If you haven't already done so, all EQL arrays should be running 10.0.3 firmware. It is extremely stable and has all available fixes.
Regards,
Don
Origin3k
4 Operator
4 Operator
•
1.8K Posts
0
February 28th, 2022 08:00
The given answer is only 99.9% correct. There is another way(GUI) to manage a EQL. The Dell SC was the succesor of the SC and to makes the migration easier the SC solution can manage SC and PS as well. Unfortunately it comes only with 50% or less of the available PS config tasks but it might be enough to manage a already configured Group of PS.
The 2nd. drawback it that the SC management is also based on JAVA but the Windows GUI comes with embedded JRE so it will work.
What you need is
dwilliam62
1 Rookie
1 Rookie
•
1.5K Posts
1
February 28th, 2022 09:00
Hello,
True, but it seems like the original poster wanted to remove Java entirely from the process. Also, assumes you replaced EQL with SC storage.
Regards,
Don