Unsolved
1 Rookie
•
31 Posts
0
1976
Dell S4112F OS10 Upgrade
Hi
We have 4 switches.
all running 10.4.3.
Since i found the update process very difficult, is there any paid service for that?
Unsolved
1 Rookie
•
31 Posts
0
1976
Hi
We have 4 switches.
all running 10.4.3.
Since i found the update process very difficult, is there any paid service for that?
Top
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
August 15th, 2022 22:00
Hi, thanks for choosing Dell. As long as your warranty is effective and if you want to get help from phone support, you wouldn't necessary be required to pay extra and they will be happy to help.
In the meantime,
STEP1: OS10.5.0.9 upgrade method:
Issue the following commands.
S4128F#show version --> Check the current OS10 version.
S4128F#dir usb --> Verify if an USB drive is successfully recognized and has the necessary FW updater file in.
S4128F#image install usb://PKGS_OS10-Enterprise-10.5.0.9.354stretch-installer-x86_64.bin
S4128F#show image status --> Make sure if a new OS10 version installation is completed.
S4128F#show boot --> Make sure if the new OS10 version is installed into standby partition.
S4128F#boot system standby --> Change next boot version to the standby partition.
S4128F#show boot --> Verify if the next boot version is the newer version.
S4128F#write memory --> Save the configuration.
S4128F#reload --> Reboot the switch to proceed to OS10 upgrade.
Note: After reloading the switch, please wait for OS10 upgrade to be completed (about 20-30 minutes) and don't press any keys until you are prompted to log in.
S4128F#show version --> Verify if the current version is updated to the newer version.
S4128F#show boot --> Check the current OS10 version.
step 2
STEP2:1:Upgrade ONIE-Firmware(BIOS/CPLD)
Issue the following commands.
S4128F#system "sudo /mnt/onie-boot/onie/tools/bin/onie-version" --> Check the current ONIE version.
S4128F#dir usb --> Verify that an USB drive is successfully recognized and has the necessary ONIE firmware.
S4128F#image install usb://onie-updater-x86_64-dellemc_s4100_c2338-r0.3.33.1.1-10
S4128F#show image status --> Make sure if a new ONIE firmware version is completed.
S4128F#show image firmware --> Make sure if a new ONIE firmware is installed into the switch.
S4128F#reload --> Reboot the switch to proceed to ONIE firmware upgrade.
Note: After reloading the switch, please wait for 20mins for ONIE firmware to be completed, and don't press any keys until you are prompted to log in.
S4128F#show image firmware --> Make sure that onie-firmware upgrade is successfully done.
S4128F#system "sudo /mnt/onie-boot/onie/tools/bin/onie-version" --> Check the current ONIE version after reboot.
STEP2:2: Upgrade FW updater
Issue the following commands.
S4128F#show system --> Check the current FW updater version (BIOS & CPLD version) after reboot.
S4128F#dir usb --> Verify if an USB drive is successfully recognized and has the necessary FW updater file in.
S4128F#image install usb://onie-firmware-x86_64-dellemc_s4100_c2338-r0.3.33.5.1-24.bin
S4128F#show image status --> Make sure if a new FW Updater version installation is completed.
S4128F#show image firmware --> Make sure if a new FW Updater version is installed into the switch.
S4128F#reload --> Reboot the switch to proceed to FW Updater upgrade.
Note: After reloading the switch, please wait for 20mins for the FW updater upgrade to be completed, and don't press any keys until you are prompted to log in.
S4128F#show image firmware --> Make sure that onie-firmware upgrade is successfully done.
S4128F#show system --> Check the current FW updater version (BIOS & CPLD version) after reboot.
Step 3
STEP4: OS10.5.4.0 upgrade method:
Issue the following commands.
S4128F#show version --> Check the current OS10 version.
S4128F#dir usb --> Verify if an USB drive is successfully recognized and has the necessary FW updater file in.
S4128F#image install usb://PKGS_OS10-Enterprise-10.5.4.0.xxstretch-installer-x86_64.bin
S4128F#show image status --> Make sure if a new OS10 version installation is completed.
S4128F#show boot --> Make sure if the new OS10 version is installed into standby partition.
S4128F#boot system standby --> Change next boot version to the standby partition.
S4128F#show boot --> Verify if the next boot version is the newer version.
S4128F#write memory --> Save the configuration.
S4128F#reload --> Reboot the switch to proceed to OS10 upgrade.
Note: After reloading the switch, please wait for OS10 upgrade to be completed (about 20-30 minutes) and don't press any keys until you are prompted to log in.
S4128F#show version --> Verify if the current version is updated to the newer version.
S4128F#show boot --> Check the current OS10 version.
RachelGomez
162 Posts
0
September 14th, 2022 03:00
Download OS10 image from Dell Digital Locker (DDL)
1.Sign in to DDL using your account credentials: Dell Digital Locker
2 Locate the entry for your entitlement ID and order number, then select the product name.
3 Select the Available Downloads tab on the Product page.
4 Select the OS10 Enterprise Edition image to download, then click Download.
5.You may also download a License.zip file for OS10 from DDL, if needed.
Note: Read the Release Notes on Dell Digital Locker (login required) and Dell EMC SmartFabric OS10 Installation, Upgrade, and Downgrade Guide | Dell US prior to performing an upgrade for detailed information about limitations and restrictions when performing upgrades.
Note: If you are having DDL account issues, Dell Support can provide a copy of OS10 to install, however your DDL account issue will have to be fixed before obtaining a license.
Upgrade OS10 image from existing OS10 install
1.Once you download the OS10 Enterprise Edition image, extract the .TAR file.
Some Windows extract applications insert extracarriage returns (CR) or line feeds (LF) when they extract the contents of a .tar file. This may corrupt the downloaded OS10 binary image. Turn OFF this option if you use a Windows-based tool to untar an OS10 binary file.
For example, in WinRAR under the Advanced Options tab clear the TAR file smart CR/LF conversion feature.
2.Save the current configuration on the switch, and Backup the startup configuration.
3. Format a USB as VFAT/FAT32 and add the .BIN file, or move the .BIN file to a TFTP/FTP Server.
Use the native Windows tool, or equivalent, to format as VFAT/FAT32.
Starting with OS10.4, OS10 will auto-mount a new USB drive after a reboot.
3B. For OS10.3 and below a USB drive can be mounted with the following commands:
4. Save the BIN file in EXEC mode, and view the status. Do NOT use the .tar file. Update file name to match your firmware version.
Note: The image download command only downloads the software image - it does not install the software on your device. The image install command installs the downloaded image to the standby partition.
Note: This is not a required step, but recommended if slow connections can go to step 5.
5. Install the software image in EXEC mode.
6. View the status of the current software install in EXEC mode. If the install status shows FAILED, check to ensure the .TAR file is extracted correctly. See Step 1.
7 Change the next boot partition to the standby partition in EXEC mode.
8. Check whether the next boot partition has changed to standby in EXEC mode.
9. Reload the new software image in EXEC mode.
10. After the reload, verify the Firmware is updated:
OS10# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.4.0E(X2)
Build Version: 10.4.0E(X2.22)
Build Time: 2018-01-26T17:46:11-0800
System Type: S4148F-ON
Architecture: x86_64
Up Time: 02:50:18
Regards,
Rachel Gomez