Dell PowerEdge T30 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : G4N6W

Importance : Optional

Version : 1.12.0, 1.12.0 Latest version Recommended version Latest and Recommended version

Release Date : 12 Sept 2023

Download Type : System BIOS

Category : BIOS

This release contains BIOS firmware version 1.7.0 for Dell PowerEdge T30 running in the following Operating Systems: Windows and DOS.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: PowerEdge_T30_1.12.0.exe

File size: 12.07 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: e6cd8934dcfd01f8a4cb48a7ea1d514c

SHA1: c8c66faf215c3f00058c03eae7dca6598a80ed65

SHA-256: 2c61027a0e45494a257ed40071890a74fe630c81d7ddbf4c4170e9b49a0d12c6

Download .EXE

Fixes & Enhancements

This release contains security updates as disclosed in the Dell Security Advisories DSA-2023-113, DSA-2023-152, DSA-2023-161, DSA-2023-180, DSA-2023-295 and DSA-2023-207. For more information, see Dell Security Advisories and Notices..

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell PowerEdge T30 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to