Alienware m16 R2 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : F7N4N

Importance : Critical

Version : 1.9.0, 1.9.0 Latest version Recommended version Latest and Recommended version

Release Date : 09 Jan 2025

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Alienware_m16_R2_1.9.0.exe

File size: 19.32 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: af8a0400964e03255a282590aff1956b

SHA1: 442ec4b4dd778909f9a53b03ebf0fe38abbb3446

SHA-256: 3b1ad2f789524900d2d0468ad9b10b29fb054c1f089d22dfad9c8213ead675d3

Download .EXE

File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.

File Name: BIOS_IMG.rcv

File size: 19.32 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: af8a0400964e03255a282590aff1956b

SHA1: 442ec4b4dd778909f9a53b03ebf0fe38abbb3446

SHA-256: 3b1ad2f789524900d2d0468ad9b10b29fb054c1f089d22dfad9c8213ead675d3

Download .RCV

Fixes & Enhancements

Fixes:
- This release contains security updates as disclosed in the Dell Security Advisories DSA-2025-005 and DSA-2025-020. For more information, see Dell Security Advisories and Notices.
- Fixed an issue where the BIOS event log displays an incorrect entry. This issue occurs after you run the Dell Command Configuration Tool in the Authenticate BIOS Interface.
- Fixed an issue where you cannot modify the function of the \,], and C keys under the AlienFX in the Alienware Command Center application.

Enhancements:
- This update adds a warning message to be displayed after you enable Secure Boot and disable UEFI CA in the BIOS Setup.
- This update adds the support for Dell Command | Secure BIOS configuration to enable certificate-based authentication for BIOS configurations.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Alienware m16 R2 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to