Mellanox Linux Driver Source code for Mellanox ConnectX-3, and ConnectX-3 Pro and ConnectX-4 Lx Ethernet adapters, Mellanox OFED 3.2-1.0.1.1

FIXES
------
Virtualization
- Fixed an issue which prevented the driver from reaching VLAN when the VLAN was created over a Linux bridge.
- Fixed VXLAN functionality issues.

HPC Acceleration packages
- Fixed a rare issue which allowed the knem package to run depmod on the wrong kernel version.

Driver uninstallation
- Fixed an issue causing MLNX OFED to remove the gmutth package upon driver uninstall.

PFC
- Added a warning message in dmesg, notifying the user that the PFC RX/TX cannot be enabled simultaneously with Global Pauses. In this case Global Pauses will be disabled.

Performance
- Fixed an issue causing inconsistent performance with ConnectX-3 and PowerKVM 2.1.1.

Ethernet
- Added a new module parameter to control the number of IRQs allocated to the device.
- Hardware checksum call trace may appear when receiving IPV6 traffic on PPC systems that uses CHECKSUM COMPLETE method.

SR-IOV/RoCE
- Fixed a problem on VFs where the RoCE driver registered a zero MAC into the port's MAC table (during QP1 creation) because the ETH driver had not yet generated a non-zero random MAC for the ETH port.t

SR-IOV
- Passed the correct port number in port-change event to single-port VFs, where the actual physical port used is port 2.
- Fixed double-free memory corruption in case where SR-IOV enabling failed (error flow).

Configuration
- Fixed an issue which prevented the driver version to be reported to the Remote Access Controller tools (such as iDRAC)

Start-up sequence
- Fixed a crash in EQ's initialization error flow.

mlx4_en
- Fixed ping/traffic issue occurred when RXVLAN offload was disabled and CHECKSUM COMPLETE was used on ingress packets.

ENHANCEMENTS
---------------------
- libibverbs
- Added API and primitives for Erasure Coding calculations.
Verbs:
- Ibv_exp_alloc_ec_calc
- Ibv_exp_dealloc_ec_calc
- Ibv_exp_ec_encode_sync
- Ibv_exp_ec_decode_sync
- Ibv_exp_ec_encode_async
- Ibv_exp_ec_decode_async
- Ibv_exp_ec_encode_send
Structs:
- Ibv_exp_ec_calc
- Ibv_exp_ec_mem
- Ibv_exp_ec_stripe
- Ibv_exp_ec_comp
- Added version 1 of the CQ family with support for:
- Multi-Packet RQ (also called striding RQ)
- Cvlan stripping offload
- Added enhanced masked-atomic device capability
- Added a flag to the create QP/WQ option to enable end of RX message padding
- Added support for ConnectX-4/ConnectX-4 LX adapters