- Functionality fixes / workaround for various Smart Cards - Fix for firmware lock when removing a Smart Card after being asked for a PIN - Fix for DOS upgrade error for systems with Upek sensor - Enumeration changes to disallow USB transactions until fully enumerated by the host
The latest Dell Driver Pack must be installed in order for the USHUPGRADE to communicate with the USH. Failure to upgrade the driver pack may result in the application being unable to start.
The USHUPGRADE is not a stand alone application. It requires all files contained in the firmware directory to update the USH firmware. The files USHUPGRADE uses depend on the particular system.
The USHUPGRADE can only be run by a user with Administrator privileges.
NOTE: If running from Vista with User Account Control (UAC) enabled, the USHUPGRADE must be run as an Administrator.
----------------- GETTING STARTED -----------------
Please refer to the \firmware\ eadme.txt file for advanced command line options and result codes
Custom Instructions for DELL_CONTROLVAULT_FW_A09_R220789.exe:
-------- DOWNLOAD -------- 1. Click Download Now, to download the file. 2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
---------------- EXTRACT FIRMWARE ---------------- 6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears. 7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx. 8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''t exist, you''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted. 9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------ Installation/Update From MS-DOS. ------------------------------------------ The TPM must be enabled/deactivated in BIOS for the USH firmware to be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc) 11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation. 12. Shut down your computer and boot to the bootable MS-DOS disk 13. Switch to the folder that was created in step 11. 14. Run UPDATE.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------ Installation/Update From Windows XP. ------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware) 11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system. 12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------ Installation/Update From Vista. ------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware) 11. Right click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system, and select ''''Run As Administrator''''. 12. Follow the on-screen prompts.