Hard Drive Installation (via WinZip) with Setup.exe File for R89438.EXE
Download 1.Click Download Now, to download the file. 2.If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement. 3.When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 4.From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 5.If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install 1.Double-click the new icon on the desktop labeled R89438.EXE. 2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R89438. Write down this path so the executable (I.e. Setup.exe) file can be found later. 3.The Self-Extractor window appears. 4.Click OK. 5.After completing the file extraction, if the Self-Extractor window is still open, close it. 6.Click the Start button and then click Run. 7.Type C:\DELL\DRIVERS\R89438 in the Open textbox and then click OK. 8.Follow the on-screen installation instructions.
Getting Started with the Trusted Platform Module (TPM) ------------------------------------------------------
Installation and Activation of the TPM requires several steps which must be performed in the following order.
Software Installation --------------------- 1) Install the software package (see the instructions listed above).
Turn on the TPM --------------- 2) Reboot the computer and enter the system SETUP program by pressing "F2" during the Power On Self Test. 3) In the Setup program, open the "Security" settings category and select the "TPM Security" menu option. 4) Set the TPM Security state to "On." 5) Exit from the Setup program by pressing the [Esc] key, when prompted make sure to choose the "Save / Exit" option in order to keep the changes.
NOTE: If this is the first time the TPM has ever been used on this computer, you must perform steps 6 through 10 below. If the TPM on this system has previously been used before, however, you may now skip directly to step 11. Steps 6 through 10 must be executed once, and only once, on any given system.
Perform Software Vendor Activation ---------------------------------- 6) Boot into the Windows operating system 7) Launch the Broadcom Secure Foundation (TM) Platform Initialization wizard by double-clicking on its icon in the system tray on the lower right hand corner of the screen. 8) The Platform Initialization Wizard will execute a function called "Vendor Activation." This is a one-time operation that only occurs once on any given system. 9) Follow the instructions in the dialog box to execute the Vendor Activation step. 10) The system will now reboot automatically. Proceed to step 11.
Physically Activate the TPM --------------------------- 11) Reboot the computer and enter the system SETUP program again by pressing "F2" during the Power On Self Test. 12) In the Setup program, open the "Security" settings category and select the "TPM Activation" menu option. 13) Set the TPM Activation state to "Activate". 14) Exit from the Setup program by pressing the [Esc] key, when prompted make sure to choose the "Save / Exit" option in order to keep the changes.
Platform and User Initialization -------------------------------- 15) At this point, the TPM is now ready to be put into service. When the operating system reboots, launch the Broadcom Secure Foundation (TM) Platform Initialization by double-clicking on its icon in the system tray on the lower right hand corner of the screen. This wizard will walk you through the procedure of establishing the TPM Owner and User passwords and credentials. For more information, please consult the "Broadcom Secure Foundation (TM) Getting Started Gui