TPMサポートが必要ですか？
その他の役に立つ情報については、当社のナレッジベースを参照してください。記事を読む。Dell ControlVault、v.13.6.98.0、A13
自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
12.6.113.0 Production Firmware
Precision M6400のすべてのドライバーを表示するには、次へ移動します： ドライバおよびダウンロード。
推奨
使用可能な最新バージョンのドライバーをロード中...
これはこのドライバーのDell検証済み最新バージョンです
これはこのドライバーのDell検証済み最新バージョンではありません
Dell_ControlVault_A13_R242191.exe | 5.37 MB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
ファイル形式:
外付けZipPack
ファイル名:
Dell_ControlVault_A13_R242191.exe
ファイルサイズ:
5.37 MB
フォーマットの説明
このファイルには、圧縮（zip圧縮）された一連のファイルが含まれています。このファイルをハードドライブ上のフォルダにダウンロードしてから実行（ダブルクリック）すると、一連のファイルが解凍されます。指示に従ってインストールを完了してください。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
利用不可
SHA1:
利用不可
SHA-256:
利用不可
自動スキャンを使用するには、管理者としてWindowsにサインインしてください。すでに管理者としてサインインしていて、このメッセージが表示されている場合は、再起動してください。
お客様のシステムは貴社のIT管理者によって管理されおり、機能が制限されている可能性があります。
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
- Several TPM fixes
- Windows Upgrade Tool now sets the system parameters automatically
- New Windows Upgrade Tool with more informative messages. Please see \firmware\readme.txt for more information.
詳細を見る
- Windows Upgrade Tool now sets the system parameters automatically
- New Windows Upgrade Tool with more informative messages. Please see \firmware\readme.txt for more information.
バージョン
13.6.98.0, A13
リリース日:
15 10月 2009
ダウンロード タイプ
ファームウェア
カテゴリ
セキュリティ
重要度
オプションデル・テクノロジーズでは、このアップデートがお使いのシステムに適用されるかどうか確認することをお勧めします。このアップデートには、特定の構成にのみ影響を与える変更が含まれているか、新機能が含まれています。新機能は、使用している環境に適合する場合もありますが、適合しない場合もあります。
重要な情報
-----------------
REQUIREMENTS
-----------------
The Dell Driver Pack must be installed in order for the USHUPGRADE to
communicate with the USH.
The USHUPGRADE is not a stand alone application. It requires all files
contained in the firmware directory to update the USH firmware.
The files USHUPGRADE uses depend on the particular system.
The USHUPGRADE can only be run by a user with Administrator privileges.
NOTE: If running from Vista with User Account Control (UAC) enabled,
the USHUPGRADE must be run as an Administrator.
-----------------
GETTING STARTED
-----------------
Please refer to the \firmware\
eadme.txt file for advanced command line
options and result codes
REQUIREMENTS
-----------------
The Dell Driver Pack must be installed in order for the USHUPGRADE to
communicate with the USH.
The USHUPGRADE is not a stand alone application. It requires all files
contained in the firmware directory to update the USH firmware.
The files USHUPGRADE uses depend on the particular system.
The USHUPGRADE can only be run by a user with Administrator privileges.
NOTE: If running from Vista with User Account Control (UAC) enabled,
the USHUPGRADE must be run as an Administrator.
-----------------
GETTING STARTED
-----------------
Please refer to the \firmware\
eadme.txt file for advanced command line
options and result codes
サポート対象のオペレーティングシステム
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista（64ビット）
Windows XP
Windows XP, 64-bit
別のOSをお探しですか? デルがサポートしているオペレーティングシステムの一覧をご覧ください。
インストール手順
Custom Instructions for Dell_ControlVault_A13_R242191.exe:
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
-----------------
UPDATE PROTECTION
-----------------
Please note: The USH firmware update process contains a protection mechanism to prevent unauthorized updates.
Protection Mechanism: Anti-Hammering.
The USH is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the USH will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the USH has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''''''t exist, you''''''''''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The TPM setting must be set to enabled/deactivated in BIOS for the USH firmware to be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run DOSUPDAT.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Windows XP.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Vista.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Right click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system, and select ''''''''Run As Administrator''''''''.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
-----------------
UPDATE PROTECTION
-----------------
Please note: The USH firmware update process contains a protection mechanism to prevent unauthorized updates.
Protection Mechanism: Anti-Hammering.
The USH is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the USH will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the USH has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''''''t exist, you''''''''''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The TPM setting must be set to enabled/deactivated in BIOS for the USH firmware to be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run DOSUPDAT.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Windows XP.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Vista.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Right click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system, and select ''''''''Run As Administrator''''''''.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.