LiteOn CA3-8D256-Q11/CA3-8D512-Q11 PCIe NVMe SSD Firmware Update
再起動が必要です 自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
This package contains the firmware for the LiteOn CA3-8D256-Q11 256 GB, Revision C48110C, and CA3-8D512-Q11 512 GB, Revision C49110C. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives. The firmware manages the functionality of the devices. This package enables the Dell System Crash Protection (SCP) feature. It also improves the performance of the solid-state drive (SSD) by distributing power into the SSD efficiently according to the power state of the system.
Precision 3530のすべてのドライバーを表示するには、次へ移動します： ドライバおよびダウンロード。
推奨
使用可能な最新バージョンのドライバーをロード中...
これはこのドライバーのDell検証済み最新バージョンです
これはこのドライバーのDell検証済み最新バージョンではありません
LiteOn CA3-8D256-Q11_CA3-8D512-Q11 W3WWY_ZPE.exe | 2.56 MB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
ファイル形式:
外付けZipPack
ファイル名:
LiteOn CA3-8D256-Q11_CA3-8D512-Q11 W3WWY_ZPE.exe
ファイルサイズ:
2.56 MB
フォーマットの説明
このファイルには、圧縮（zip圧縮）された一連のファイルが含まれています。このファイルをハードドライブ上のフォルダにダウンロードしてから実行（ダブルクリック）すると、一連のファイルが解凍されます。指示に従ってインストールを完了してください。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
bf90f878829fedc43f628676b6635668
SHA1:
3e341e08f8489ad7e282c81ab4c3fba31a1f6d6b
SHA-256:
9397f0bbebf0cab98a022e140de577f963f3ddbb5e084af3dd36e895b4bca279
自動スキャンを使用するには、管理者としてWindowsにサインインしてください。すでに管理者としてサインインしていて、このメッセージが表示されている場合は、再起動してください。
お客様のシステムは貴社のIT管理者によって管理されおり、機能が制限されている可能性があります。
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
- Enables the Dell System Crash Protection (SCP) feature.
- Improves the performance of the solid-state drive (SSD) by distributing power into the SSD efficiently according to the power state of the system.
詳細を見る
- Improves the performance of the solid-state drive (SSD) by distributing power into the SSD efficiently according to the power state of the system.
バージョン
C48110C, C49110C, A00
リリース日:
04 3月 2019
ダウンロード タイプ
ファームウェア
カテゴリ
ストレージ
重要度
推奨デル・テクノロジーズでは、次に予定されているアップデート時に、このアップデートを適用することをお勧めします。このアップデートには、システム全体の正常性を維持するための変更が含まれています。これにより、システム ソフトウェアが最新の状態に保たれるとともに、システム ソフトウェアと他のシステム モジュール（ファームウェア、BIOS、ドライバー、ソフトウェア）との互換性が維持されます。また、その他の新機能が追加される場合もあります。
重要な情報
It is recommended that you back up your data before performing this update. Do not interrupt your system during the firmware upgrade process. If the firmware upgrade process is interrupted, the solid-state drive may not function properly.
サポート対象のオペレーティングシステム
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
別のOSをお探しですか? デルがサポートしているオペレーティングシステムの一覧をご覧ください。
適応先
LITEON CA3 256G PCIE NVME 2280 SSD (CLASS 40)
LITEON CA3 256G PCIE NVME 2280 SSD (CLASS 40)
LITEON CA3 512G PCIE NVME 2280 SSD (CLASS 40)
インストール手順
Note:
Before updating this firmware, ensure that you back up the data in the system and close all open applications. It is also recommended to connect the power cable when it is not a desktop and disconnect all external storage devices.
Download
1. Click Download File to download the file.
2. When download is complete, run the downloaded package to extract it.
3. Click Continue and take note of the extract location.
Firmware upgrade through the Windows utility
Procedure
1. Go to the folder where you have extracted the package.
2. Right-click the file and select Run as administrator to run the file with administrator privilege.
3. Click Yes to proceed.
4. Select the solid-state drive from the drop-down and click Update to begin the update process.
After the firmware is completed, a popup window is displayed
5. Click OK to continue.
A message prompting to reboot the system is displayed. Close all open applications and save your data.
6. Click Yes to reboot the system.
New firmware is applied when you power on the system. To confirm whether the firmware update was successful, repeat the upgrade procedure steps 1-3. Present firmware version and the available update are displayed under the respective solid-state drive.
Firmware upgrade through the DOS utility
Using Bootable USB drive
Note: Rufus is not a Dell certified software. Dell does not support issues regarding this software.
1. Download Rufus from https://rufus.ie. Rufus is a stand-alone program and does not require installation.
2. Connect an empty USB drive and open the Rufus program. The USB drive should be of at least 4 GB.
3. Select Device as the connected USB drive.
4. Choose Disk or ISO image from the drop-down list under Boot selection.
5. Click SELECT and browse to the DOS folder in firmware utility to choose the ISO image file.
6. Click START once the ISO image file is selected.
Rufus prompts a warning message that all the data in the USB drive will be destroyed.
7. Click OK to proceed.
The ISO image file starts copying to the USB drive. This process can take several minutes.
8. Close Rufus and remove the USB drive once the status shows READY.
9. Plug in the USB drive into the system that requires the firmware update.
10. Boot the system from the USB drive.
11. Press Enter to proceed when prompted.
12. Read the warning message that is displayed and press Y to proceed.
The update tool automatically detects the solid-state drives present on the system.
13. Press Y to proceed with the update.
14. Reboot the system after the update completes.
To confirm whether the firmware update was successful, open Device Manager -> open Disk drives -> right-click the SSD -> click Properties -> choose Hardware Ids from the list under Details tab and check the firmware version.
Using a CD
1. Go to the DOS folder.
2. Insert a blank CD into CD/DVD R/W drive.
3. Burn the ISO image that is present in the DOS folder into the CD.
4. Insert the CD into the CD/DVD drive of the system that requires the firmware update.
5. Boot the system from the CD/DVD drive.
6. Select the drive that is targeted after the system boots into DOS.
The update tool automatically detects the solid-state drives present on the system.
7. Read the warning message that is displayed and press Y to proceed.
8. When the update finishes, remove the CD from your CD/DVD drive and reboot the system.
To confirm whether the firmware update was successful, open Device Manager -> open Disk drives -> right-click the SSD -> click Properties -> choose Hardware Ids from the list under Details tab and check the firmware version.
Before updating this firmware, ensure that you back up the data in the system and close all open applications. It is also recommended to connect the power cable when it is not a desktop and disconnect all external storage devices.
Download
1. Click Download File to download the file.
2. When download is complete, run the downloaded package to extract it.
3. Click Continue and take note of the extract location.
Firmware upgrade through the Windows utility
Procedure
1. Go to the folder where you have extracted the package.
2. Right-click the file and select Run as administrator to run the file with administrator privilege.
3. Click Yes to proceed.
4. Select the solid-state drive from the drop-down and click Update to begin the update process.
After the firmware is completed, a popup window is displayed
5. Click OK to continue.
A message prompting to reboot the system is displayed. Close all open applications and save your data.
6. Click Yes to reboot the system.
New firmware is applied when you power on the system. To confirm whether the firmware update was successful, repeat the upgrade procedure steps 1-3. Present firmware version and the available update are displayed under the respective solid-state drive.
Firmware upgrade through the DOS utility
Using Bootable USB drive
Note: Rufus is not a Dell certified software. Dell does not support issues regarding this software.
1. Download Rufus from https://rufus.ie. Rufus is a stand-alone program and does not require installation.
2. Connect an empty USB drive and open the Rufus program. The USB drive should be of at least 4 GB.
3. Select Device as the connected USB drive.
4. Choose Disk or ISO image from the drop-down list under Boot selection.
5. Click SELECT and browse to the DOS folder in firmware utility to choose the ISO image file.
6. Click START once the ISO image file is selected.
Rufus prompts a warning message that all the data in the USB drive will be destroyed.
7. Click OK to proceed.
The ISO image file starts copying to the USB drive. This process can take several minutes.
8. Close Rufus and remove the USB drive once the status shows READY.
9. Plug in the USB drive into the system that requires the firmware update.
10. Boot the system from the USB drive.
11. Press Enter to proceed when prompted.
12. Read the warning message that is displayed and press Y to proceed.
The update tool automatically detects the solid-state drives present on the system.
13. Press Y to proceed with the update.
14. Reboot the system after the update completes.
To confirm whether the firmware update was successful, open Device Manager -> open Disk drives -> right-click the SSD -> click Properties -> choose Hardware Ids from the list under Details tab and check the firmware version.
Using a CD
1. Go to the DOS folder.
2. Insert a blank CD into CD/DVD R/W drive.
3. Burn the ISO image that is present in the DOS folder into the CD.
4. Insert the CD into the CD/DVD drive of the system that requires the firmware update.
5. Boot the system from the CD/DVD drive.
6. Select the drive that is targeted after the system boots into DOS.
The update tool automatically detects the solid-state drives present on the system.
7. Read the warning message that is displayed and press Y to proceed.
8. When the update finishes, remove the CD from your CD/DVD drive and reboot the system.
To confirm whether the firmware update was successful, open Device Manager -> open Disk drives -> right-click the SSD -> click Properties -> choose Hardware Ids from the list under Details tab and check the firmware version.