Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

The features of the Dell Single Monitor Arm - MSA20

Summary: This article provides information about the use and features of the Dell Single Monitor Arm - MSA20.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Instructions

Table of Contents:

  1. Introduction
  2. Features
  3. Assembly
  4. Range of Movement

Introduction

 

MSA20 Product Shot

(Figure.1 Dell Single Monitor Arm)

The MSA20 supports mounting either your computer or monitor. You can easily install your Dell UltraSharp, or P-Series monitors using the Quick Release. It easily mounts a selected OptiPlex Micro, Ultra, or Wyse computer on the monitor with virtually no tools. The integrated cable management slot with clips can hold up to 10 cables which help to keep your desk neat and uncluttered.

You can locate further information about the MSA20 Single Monitor Arm on the following link:

You can search the Dell Shop for the MSA20 to find out information such as the price.


Features

 

Product Type Desk Mount (Adjustable)
Color Black
Installation Clamp desks up to 53 mm (2.1 in.) thick and
Grommet hole diameter is up to 50.8 mm (2 in.)
Panel Mount Dell Quick Release Mount
VESA-compliant Monitor Mount
VESA Adapter Plate Mount Sets included
Computer Mount Select OptiPlex Micro and Ultra models and
Wyse Thin Clients
VESA Mounting Interface 100 x 100 mm (3.9 in. x 3.9 in.)
Dynamic Arm Supported Weight Range 2.2 kg to 10 kg (4.8 lbs to 22.0 lbs)
Recommended Use LCD Flat Display
Recommended Display Size 19 in. to 38 in.
Cable Management Slots in upper and lower arms for up to 10 cables
 
Note: The swivel range limiter switch is set to the unlocked position when the stand is shipped from Dell.

Assembly

 

Note: The following parts all ship in the box:
  • Base
  • Static Arm
  • Dynamic Arm
  • VESA adapter plate
  • Screws
  • Plastic spacer

What is in the box?

(Figure.2 In the Box)

 

Assembly Steps:

  1. The desk mount fits to a flat edge like the back of your desk.

    Desk Mount

    (Figure.3 Desk Mount)

  2. Attach the screw clamp over the bolts in the desk mount and tighten the bolts and then the screw clamp to secure the mount to the desk.

    Screw Clamp

    (Figure.4 Screw Clamp)

  3. Slide the lower arm over the desk mount.

    Lower Arm

    (Figure.5 Lower Arm)

  4. Line up the dots on the arm and mount and move the slider to lock the arm at either 180° or 360°.

    Slider Lock on Lower Arm

    (Figure.6 Slider Lock Lower Arm)

  5. Slide the upper arm down on to the lower arm.

    Upper Arm

    (Figure.7 Upper Arm)

  6. Line up the dots where the lower and upper arms connect and use the slide to lock in your preferred angle

    Slider Lock on Upper Arm

    (Figure.8 Slider Lock Upper Arm)

  7. Slide and pull the covers off the lower and upper arms.

    Cable Tray Covers

    (Figure.9 Cable Tray Covers)

  8. Route your cables through the exposed clips to keep them tidy and out of the way.

    Cable Routing

    (Figure.10 Cable Routing)

  9. Attach your computer or display to the end of the arm.

    Attachment

    (Figure.11 Attachment)

  10. Plug up your cables.

    Attach Cables

    (Figure.12 Attach Cables)

  11. Fit the covers back onto the lower and upper arms to conceal the cables.


Range of Movement

 

Vertical Movement

(Figure.13 Vertical Movement)

Depth of Movement

(Figure.14 Depth of Movement)

Movement  Height adjustable, Swivels, Tilts, and Pivots
Pivot 90° clockwise and 90° anti-clockwise
Attachment Tilt Tilts downward 35° and upwards by 80°
Lower Arm Slide locks between 180° and 360° at the base of the arm.
Upper Arm Slide locks between 180° and 360° at the base of the upper arm.
Attachment Swivel 180° at the end of the upper arm
Pan 180°
Height Range 266 mm (10.5 in.)
Depth Range 548 mm (21.6 in.)

Article Properties


Affected Product

OptiPlex Micro, Alienware and Dell Gaming Monitors, C Series, D Series, E Series, P Series, S Series, SE Series, Dell Single Monitor Arm - MSA20, OptiPlex 3000 Thin Client

Product

UltraSharp Premier (UP) Series, UltraSharp (U) Series

Last Published Date

25 Apr 2024

Version

8

Article Type

How To