Cloudlink How to add or delete an NTP server for CloudLink Center

Summary: Use this procedure to add or delete an NTP server for CloudLink Center.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Add an NTP server for CloudLink Center.

 
When you add an NTP server, you provide its IP address or hostname. To use a hostname, ensure that you have configured at least one DNS server first. For more information, see Domain Name System servers in CloudLink Administrative Guide.

If DNS servers have not been configured, the NTP servers do not work.

Steps

  1. Log in to CloudLink Center.
  2. Click Server > Time > Add.
    The Add NTP Server dialog box is displayed.
  3. In the NTP Server box, enter the hostname or IP address of the NTP server, and then click Add.

 

Delete NTP server

Steps

  1. Log in to CloudLink Center.
  2. Click Server > Time.
  3. Select the check box next to the NTP server you want to delete, and then click Delete NTP Server.
  4. In the Confirm NTP Server Deletion dialog box, when prompted to confirm the delete request, click Delete.

 

Affected Products

CloudLink SecureVM, PowerFlex rack, ScaleIO
Article Properties
Article Number: 000273265
Article Type: How To
Last Modified: 15 Jul 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.