Isilon: Node Firmware versions show in firmware status list
Oversigt: When 'isi upgrade cluster firmware devices' is run, the firmware version columns for all components in the cluster show instead of the installed and desired firmware versions.
Denne artikel gælder for
Denne artikel gælder ikke for
Denne artikel er ikke knyttet til et bestemt produkt.
Det er ikke alle produktversioner, der er identificeret i denne artikel.
Symptomer
When 'isi upgrade cluster firmware devices' is run, the firmware version columns for all components in the cluster show <Unknown> <Unknown> instead of the installed and desired firmware versions.
Årsag
This is caused by incompatibility between the installed firmware package and the OneFS version it is installed on. There are currently two active branches of Node Firmware Package: the 10.x branch, which is compatible with OneFS 8.x, and the 11.x branch, which is compatible with OneFS 9.x. Installing the wrong branch on a OneFS version it is not compatible with will cause this issue to appear.
Løsning
First off, determine whether the wrong Node Firmware Package for your OneFS version is installed. If so, uninstall it. Then:
- If the cluster to be updated is running OneFS 8.x, install the latest NFP 10.x version.
- If the cluster to be updated is running OneFS 9.x, install the latest NFP 11.x version.
Berørte produkter
Isilon, Isilon A100, Isilon A2000, Isilon F800, Isilon F810, Isilon Gen6.5, Isilon Gen6, Isilon H400, Isilon H500, Isilon H5600, Isilon H600, Isilon HD400, Isilon S210, Isilon X210, Isilon X410, PowerScale Archive A300, PowerScale Archive A3000
, PowerScale F200, PowerScale F600, PowerScale F900, PowerScale Hybrid H700, PowerScale Hybrid H7000
...
Artikelegenskaber
Artikelnummer: 000192587
Artikeltype: Solution
Senest ændret: 26 mar. 2026
Version: 3
Find svar på dine spørgsmål fra andre Dell-brugere
Supportservices
Kontrollér, om din enhed er dækket af supportservices.