PowerStore: Custom security.evt path reverts to default after NAS Server reboot or failover

Oversigt: Starting with PowerStore version 3.0, custom paths for security and system logs can be configured through the NAS Server Registry. If the parameter cifs.userDefinedLogFiles remains at its default value of 1, the system resets log paths to their default location after a reboot or failover. ...

Denne artikel gælder for Denne artikel gælder ikke for Denne artikel er ikke knyttet til et bestemt produkt. Det er ikke alle produktversioner, der er identificeret i denne artikel.
Udforsk andre ressourcer

Symptomer

The configured custom path is reset to a different location, and logs are not updated in the originally specified directory.

Årsag

Starting from PowerStore v. 3.0, custom log paths can be set using the NAS Server Registry. By default, the parameter cifs.userDefinedLogFiles is set to 1 to prevent CIFS outages that may occur if incorrect paths are specified. When this parameter remains at its default value, the system automatically resets log file paths to their default locations (for example, /.etc/security.evt).

If a custom path (for example, /filesystem/audits/ - the folder must be created before use) is configured while this parameter is still set to 1, the system will revert to the default path after a reboot or failover.

This occurs because the custom path is not accessible during the boot process. The file system mounts only after the NAS container restarts, causing the system to fall back to the default location.

Løsning

Contact Dell Technical Support for assistance to resolve this issue.

Berørte produkter

PowerStore
Artikelegenskaber
Artikelnummer: 000404404
Artikeltype: Solution
Senest ændret: 29 dec. 2025
Version:  2
Find svar på dine spørgsmål fra andre Dell-brugere
Supportservices
Kontrollér, om din enhed er dækket af supportservices.