Stop Error in IASTOR.SYS

Zusammenfassung: How to resolve a STOP error in IASTOR.SYS with a RAID configuration.

Symptome

Ursache

Lösung

Feedback geben
Dieser Artikel gilt für Dieser Artikel gilt nicht für Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden. In diesem Artikel werden nicht alle Produktversionen aufgeführt.
Andere Ressourcen ansehen

Symptome

Change the SATA Operation Setting From RAID Autodetect / AHCI to RAID Autodetect / ATA in System Setup
 

  1. Restart the computer.

  2. Press <F2> immediately after the keyboard LEDs flash to enter the BIOS (System Setup).

  3. In the System Setup screen, press <Up Arrow> or <Down Arrow> to highlight the Drives section, and then press <Enter>.

  4. Press the <Up Arrow> or <Down Arrow> to highlight the SATA Operation section, and then press <Enter>.

  5. Press the <Up Arrow> or <Down Arrow> to highlight RAID Autodetect / ATA, and then press <Enter>.

  6. Press <Esc> to exit the System Setup.

  7. Press <Up Arrow> or <Down Arrow> to highlight Save/Exit, and then press <Enter>. The computer restarts.

 

Ursache

Download and Install the Intel® Matrix Storage Driver
 

To download and install the Intel® Matrix Storage Driver, perform the following steps:

  1. Click here to download the R130119.exe file.
     
  2. Double-click the R130119.EXE file on the desktop. The Self-Extracting window appears and prompts you to extract to the C:\DELL\DRIVERS\R130119 directory.
     
  3. Write down this path so you can find the Setup.exe file later.
     
  4. In the Self-Extractor window, click OK.
     
  5. Click the Start button, and then click Run.
     
  6. Type C:\DELL\DRIVERS\R130119 in the Open box and click OK.
     
  7. Follow the on-screen installation instructions.

 

Lösung

Change the SATA Operation Setting to RAID Autodetect / AHCI in System Setup
 

To change the SATA Operation settings in the System Setup (BIOS):

  1. Reboot the system.
     
  2. Press the <F2> key immediately after the keyboard LEDs flash to enter the System Setup (BIOS).
     
  3. Press the <Up Arrow> and <Down Arrow> keys to highlight the Drives section and press the <Enter> key.
     
  4. Press the <Up Arrow> and <Down Arrow> keys to highlight the SATA Operation section and press the <Enter> key.
     
  5. Press the <Up Arrow> and <Down Arrow> keys to highlight RAID Autodetect / AHCI and press the <Enter> key.
     
  6. Press <ESC> to exit the System Setup (BIOS).
     
  7. Press the <Up Arrow> and <Down Arrow> keys to highlight Save/Exit and press the <Enter> key.

 


Artikeleigenschaften
Artikelnummer: 000145539
Artikeltyp: Solution
Zuletzt geändert: 26 Feb. 2021
Version:  3
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.