PowerStore: Custom security.evt path reverts to default after NAS Server reboot or failover

Zusammenfassung: Starting with PowerStore version 3.0, custom paths for security and system logs can be configured through the NAS Server Registry. If the parameter cifs.userDefinedLogFiles remains at its default value of 1, the system resets log paths to their default location after a reboot or failover. ...

Dieser Artikel gilt für Dieser Artikel gilt nicht für Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden. In diesem Artikel werden nicht alle Produktversionen aufgeführt.
Andere Ressourcen ansehen

Symptome

The configured custom path is reset to a different location, and logs are not updated in the originally specified directory.

Ursache

Starting from PowerStore v. 3.0, custom log paths can be set using the NAS Server Registry. By default, the parameter cifs.userDefinedLogFiles is set to 1 to prevent CIFS outages that may occur if incorrect paths are specified. When this parameter remains at its default value, the system automatically resets log file paths to their default locations (for example, /.etc/security.evt).

If a custom path (for example, /filesystem/audits/ - the folder must be created before use) is configured while this parameter is still set to 1, the system will revert to the default path after a reboot or failover.

This occurs because the custom path is not accessible during the boot process. The file system mounts only after the NAS container restarts, causing the system to fall back to the default location.

Lösung

Contact Dell Technical Support for assistance to resolve this issue.

Betroffene Produkte

PowerStore
Artikeleigenschaften
Artikelnummer: 000404404
Artikeltyp: Solution
Zuletzt geändert: 29 Dez. 2025
Version:  2
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.