Data Domain: How to Choose the Compression Type

Summary: This article explains the supported compression algorithms on Data Domain systems and provides guidance on selecting the appropriate compression type based on performance and data characteristics. ...

Αυτό το άρθρο ισχύει για Αυτό το άρθρο δεν ισχύει για Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν. Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Δείτε άλλους πόρους

Symptoms

Determine which compression type to use for a Data Domain filesystem.

Cause

Data Domain Operating System (DDOS) supports four compression algorithms with different compression ratios and CPU utilization:
Type Expected comp. CPU load
none 1x 0x
lz 2x 1x
gzfast 2.5x 2x
gz 3x 5x

Default Settings:

  • PowerEdge-based systems (For example: DD6400/DD6900/DD9900): gzfast
  • All other (Legacy) models: lz

Resolution

Compression Algorithm Details

  • gz offers the highest compression (approximately 3x) but consumes more CPU resources (about 5x compared to lz).
  • Compression results vary by data type:
    • For some data, gz may only be 10% better than lz.
    • For others, gz can be twice as effective.

Data Characteristics

  • Files with repetitive strings (such as, database files, log files) compress better with gz.

Performance Impact of gz

  • Backups: Initial full backups may run at ~50% of peak throughput due to higher CPU usage.
  • Cleaning: It takes longer because data is uncompressed and recompressed, potentially slowing backups and replication
  • Replication: Source system compresses data using the destination’s algorithm. If the destination uses gz, replication may slow down and impact other activities.

Recommended Use Cases for gz.

  • Applications with:
    • High deduplication
    • Low data churn
    • Minimal backup performance requirements
      Example: Nearline storage applications

Changing Compression Type

Important:

  • The filesystem must be disabled before changing the compression type.
  • New writes use the new compression type, when a change is made.
  • Existing data is converted during cleaning, which may increase cleaning time.
  • Monitor system performance for 1–2 weeks after the change.

To change the compression type:

# filesys disable
# filesys option set local-compression-type {none | lz | gzfast | gz}
# filesys enable

Επηρεαζόμενα προϊόντα

Data Domain

Προϊόντα

Data Domain
Ιδιότητες άρθρου
Article Number: 000028820
Article Type: Solution
Τελευταία τροποποίηση: 07 Ιαν 2026
Version:  4
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.