VxRail: Nodo mancante dalla pagina fisica a causa di agenti CIM e Wbem disabilitati

Summary: I nodi VxRail possono scomparire dalla pagina quando l'interfaccia VMK1 viene rimossa. Ciò può essere causato da agenti CIM (Common Information Model) disabilitati e da un servizio WBEM inattivo che blocca i provider. ...

Αυτό το άρθρο ισχύει για Αυτό το άρθρο δεν ισχύει για Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν. Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Δείτε άλλους πόρους

Symptoms

Nodo mancante nella vista della pagina fisica (VMK1 scompare automaticamente).

Cause

CIM Gli agenti sono disabilitati sul nodo.
 

Resolution

  1. Verificare che wbem è abilitato: esxcli system wbem get
  2. Se wbem è disabilitato, abilitarlo con il comando: esxcli system wbem set enable true
  3. Verificare se tutte le wbem Vengono caricati i provider: localcli system wbem provider list 
    [root@node1:] localcli system wbem provider list
Name              Enabled  Loaded
---------------------------------
sfcb_base         true     true
vmw_base          true     true
vmw_dcism         true     true
vmw_hdr           true     true
vmw_iodmProvider  true     true
vmw_kmodule       true     true
vmw_omc           true     true
vmw_pci           true     true
  4. Se del caso wbem i provider non vengono caricati, abilitare CIM agenti (sfcbd-watchdog e wsman) utilizzando i comandi riportati di seguito. 
    [root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog
sfcbd-watchdog          off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig sfcbd-watchdog on
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog start
sfcbd-init: Getting Exclusive access, please wait...
sfcbd-init: Exclusive access granted.
sfcbd-init: Request to start sfcbd-watchdog, pid 2111224
sfcbd-config[2111234]: Configuration not changed, already enabled
sfcbd-init: starting sfcbd
sfcbd-init: Waiting for sfcb to start up.
sfcbd-init: Program started normally.
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/sfcbd-watchdog status
sfcbd is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is not running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman start
openwsmand: Getting Exclusive access, please wait...
openwsmand: Exclusive access granted.
openwsmand: Starting openwsmand
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] /etc/init.d/wsman status
openwsmand is running
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman
wsman                   off
[root@vxrail-zone2-node-03:/opt/dell/srvadmin/iSM/bin] chkconfig wsman on
  5. Verificare ora che vmk1 sia stato creato sul nodo.
  6. Controllare la pagina fisica e verificare che il nodo sia integro.

Επηρεαζόμενα προϊόντα

VxRail, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes, VxRail Software, VxRail V Series Nodes, VxRail VD Series Nodes
Ιδιότητες άρθρου
Article Number: 000049893
Article Type: Solution
Τελευταία τροποποίηση: 23 Δεκ 2025
Version:  4
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.