Dell EMC Unity: Replication Connection fails Error: 0x6500128 if proper Replication Interfaces are not configured

Summary: Dell EMC Unity: Creating Replication Connection fails with Error Code: 0x6500128 if the proper Replication Interfaces are not configured on Local and Remote Systems

Αυτό το άρθρο ισχύει για Αυτό το άρθρο δεν ισχύει για Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν. Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Δείτε άλλους πόρους

Symptoms



When setting up the Replication environment, first configure the appropriate Replication Interfaces [Data Protection > Replication > Interfaces] on both the Local and Remote Dell EMC Unity systems before creating the Replication Connection from the Local system.

Create remote system
Failed
(3/23/2016, 11:56:51 AM)
Although the remote system is registered, the connectivity validation has failed. Check for any network connectivity issues, and also ensure that the time skew between the systems is less than 10 minutes. Once fixed, run the verify operation on the remote system to resolve this issue. View alerts related to the remote system connections for more information. (Error Code:0x6500128)
Details:
Register remote system on local system    Completed
Register local system on remote system    Completed
Refresh remote system connections on local system Failed
Refresh local system connections on remote system Not Started

Jobs: 
Failed: Although the remote system is registered, the connectivity validation has failed. Check for any network connectivity issues, and also ensure that the time skew between the systems is less than 10 minutes. Once fixed, run the verify operation on the remote system to resolve this issue. View alerts related to the remote system connections for more information. (Error Code:0x6500128)
Rollback Result: Task was rolled back and marked as failed. This is because some tasks failed or SP rebooted during task execution. (Error Code:0x100a)

Alerts: 
Error  
14:6077c
The remote system connection failed to validate the replication interface connectivity between the two systems.
One or more replication interface pairs are experiencing network connectivity issues between the local and remote systems.

Cause

You must create the correct Replication Interfaces before creating the Replication Connection between a Local and Remote system.

Resolution

  1. Remove the faulted Replication Connection.
Note: Do not bypass the step to remove the Replication Connection.  If you do, and create the Replication Interfaces, the Replication Session creation will fail. You must remove the faulted Connection and then follow the correct order shown below.
  1. Create the appropriate Replication Interfaces on the Local and Remote systems.
  2. Create the Replication Connection.
  3. Create Replication sessions on the appropriate NAS Server or Block LUN/Consistency Group resource.

Επηρεαζόμενα προϊόντα

Dell EMC Unity Family |Dell EMC Unity All Flash

Προϊόντα

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Hybrid
Ιδιότητες άρθρου
Article Number: 000052401
Article Type: Solution
Τελευταία τροποποίηση: 20 Οκτ 2025
Version:  4
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.