PowerStore: NTP 서버를 추가하거나 수정할 수 없음
Summary: 비동기식 어플라이언스의 PowerStore Manager를 통해 NTP 서버를 추가하거나 수정할 수 없습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
비동기식 어플라이언스의 PowerStore Manager를 통해 NTP 서버를 추가하거나 수정할 수 없습니다.
Cause
클러스터의 모든 노드는 클록을 동기화해야 합니다. 이 조건이 충족되지 않으면 NTP 서버 작업이 불가능할 수 있습니다.
Resolution
이 문제를 해결하려면 노드 시간을 서비스 스크립트 "svc_ntp_ctl"를 사용하여 수동으로 유효한 NTP 서버와 동기화합니다.
노드에서 시간이 동기화되면 PowerStore Manager를 통해 NTP 서버를 수정할 수 있습니다.
노드에서 시간이 동기화되면 PowerStore Manager를 통해 NTP 서버를 수정할 수 있습니다.
Affected Products
PowerStore, PowerStore 1000X, PowerStore 1000T, PowerStore 3000X, PowerStore 3000T, PowerStore 5000X, PowerStore 5000T, PowerStore 500T, PowerStore 7000X, PowerStore 7000TProducts
PowerStore 9000X, PowerStore 9000TArticle Properties
Article Number: 000198129
Article Type: Solution
Last Modified: 11 Apr 2022
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.