MFE SCF: Probleme bei der Verarbeitung von DEV-, EXPAND-Befehlen in kaskadierten R21-zu-R2-Umgebungen, was zu einem SCF0463E-Fehler führt

Summary: DEV, EXPAND ignoriert den R21->R2-Verbindungsstatus und die R2-Größe in der kaskadierten SRDF-Umgebung.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

In der kaskadierten SRDF-Umgebung ignoriert der BEFEHL DEV,EXPAND den R21->R2-Verbindungsstatus und die R2-Gerätegröße und sendet die Erweiterungsanforderung, die den Erweiterungsfehler verursacht, mit der Meldung:        
                                             
SCF0463E Device symdv# srdfgrp failed expansion due to Symmetrix Aborted Expansion        
                                

Cause

Dies wird durch ein Softwareproblem verursacht.

Resolution

Dauerhafte Lösung: 
  • Für Mainframe Enablers 8.5 wurde PTF SF85096 entwickelt, um das Problem zu beheben. Es kann vom Dell Online Support heruntergeladen werden.
  • Für Mainframe Enablers 8.4 wurde PTF SF84152 entwickelt, um das Problem zu beheben. Es kann vom Dell Online Support heruntergeladen werden.
  • Für Mainframe Enablers 8.3 wurde PTF SF83204 entwickelt, um das Problem zu beheben. Es kann vom Dell Online Support heruntergeladen werden.

Additional Information

PTF-Deckblatthinweis:  
++PTF(SF85096) REWORK(2021333) .                                 
++VER(Z038) FMID(SSCF850)                                        
   /*                                                             
*-------------------------------------------------------------   
* PROBLEM DESCRIPTION(S):                                        
* ------------------------------------------------------------   
* PROBLEM FIXED: OPT 591884                                       
* USERS AFFECTED: DVE users                                      
* PROBLEM DESCRIPTION: DEV,EXPAND ignores the R21->R2 link       
*                      status and the R2 size in the cascaded    
*                      SRDF environment                          
* DESCRIPTION DETAIL:                                            
*                                                                
* In the cascaded SRDF environment the DEV,EXPAND command        
* ignores R21->R2 link status and R2 device size and sends the   
* expansion request which causes the expansion failure with      
* the message:                                                   
* SCF0463E Device symdv# srdfgrp failed expansion due to          
* Symmetrix Aborted Expansion.                                   
*                                                                
* PROBLEM RESOLUTION:                                            
*                                                                
* The DEV,EXPAND command has been updated to check the link      
* status and the device size and block the expansion request     
* if it is necessary.                                             
*                                                                
* MODULES: ESFEXCMD                                              
*                                                                
* ------------------------------------------------------------   
* SF85096 29 Nov 2021 17:08:08                                   
* ------------------------------------------------------------   
*  OPT Summary                                                   
*  The following OPT was addressed by this PTF:                  
*                                                                
*    591884                                                      
*                                                                
*-------------------------------------------------------------

SCF0463E

Device symdv# [RDFG srdfgrp] failed expansion due to reason
Cause
The indicated device cannot be expanded due to the reason described in reason. If the failing device is in an SRDF relationship with the device specified in your DEV,EXPAND command, it is shown as symdv# RDFG srdfgrp where srdfgrp is the SRDF group of the device.

Affected Products

Mainframe Enablers
Article Properties
Article Number: 000196302
Article Type: Solution
Last Modified: 21 Jul 2023
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.