NVP-vProxy : Utilisation de l’outil de bilan de santé ProxyHC sur l’appliance vProxy
Summary: Utility fournit un moyen automatisé, efficace et lisible par l’utilisateur d’effectuer une première étape ou un autodiagnostic de base pour l’appliance vProxy.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Objectif :
Utility fournit un moyen automatisé, efficace et lisible par l’utilisateur d’effectuer une première étape ou un autodiagnostic de base pour l’appliance vProxy. L’utilitaire ProxyHC peut être copié sur le vProxy et exécuté à partir du dépannage NetWorker.
Par défaut, l’utilitaire ProxyHC n’est pas inclus sur le vProxy. L’utilitaire ProxyHC peut être téléchargé à partir de la page d’outils de support suivante : https://central.dell.com/solutions/Networker-Tools
NOTE:Cela utilise vos informations d’identification du site de support Dell. Pour les collaborateurs internes de Dell, vos informations d’identification d’entreprise sont utilisées. Pour vProxy 4.3.0.x (SuSE 12 SP5), vous pouvez utiliser ProxyHC-2.7.19. À partir de vProxy version 4.4.0.x (SuSE 15 SP4), vous devez utiliser ProxyHC-2.7.19.v2.
L’utilitaire peut être copié à l’aide des méthodes suivantes :
- WinSCP :
- Hôte : nom d’hôte vProxy
- Protocole : SCP
- Nom d’utilisateur : admin
NOTE : la connexion root via SSH est généralement bloquée par défaut)
- Path: /home/admin/.
- Windows Server 2019 (et versions ultérieures) dispose de fonctionnalités de ligne de commande SCP :
scp ProxyHC admin@vProxyHostname:/home/admin/ProxyHC
Mode d’emploi :
1. Connectez-vous à l’appliance vProxy à l’aide de SSH, connectez-vous en tant qu’administrateur.
2. Basculez vers l’utilisateur root :
2. Basculez vers l’utilisateur root :
sudo su -
3. Rendez ProxyHC exécutable :
chmod +x /home/admin/ProxyHC
4. Exécutez ProxyHC :
/home/admin/ProxyHC flags
Exemples d’utilisation :
my-vproxy:/home/admin # /home/admin/ProxyHC vCenter --help
usage: ProxyHC vCenter [-h] --name NAME --user USER [--pwd PWD] [--vm VM]
[--nsruser NSRUSER] [--nsrpwd NSRPWD]
[--nsrauthc NSRAUTHC] [--allproxies ALLPROXIES]
[--DDhost DDHOST]
{auth,port,perm,disk,hotadd,migration,listsession,annotation,cleanup,kb524127,all,layout,tasks,datastore,vmsnapchain,vmdisksize,termsoapsession}
...
positional arguments:
{auth,port,perm,disk,hotadd,migration,listsession,annotation,cleanup,kb524127,all,layout,tasks,datastore,vmsnapchain,vmdisksize,termsoapsession}
sub-command help
auth test authentication against vCenter server
port check open ports to ESXi hosts in cluster and data
domain systems
perm check vCenter access permissions
disk check & release extra disks from vProxy
hotadd check for hotadd access to provided VM
migration check vCenter for stale migration locks
listsession print login session list to log
annotation check vCenter for stale backup locks(annotations)
cleanup remove left over artifacts(extra disks,
locks/annotations) and find migration locks.
kb524127 check for invalid state of vProxy VM
all All vCenter tools(combination of port, perm and
cleanup)
layout check for description of files that make up VM
tasks check orphaned tasks in vCenter
datastore look for datastores with unsupported names
vmsnapchain check if any protected VM has excessive child disks
vmdisksize check if any protected VM has irregular disk size i.e.
trailing .5 KB
termsoapsession terminate soap session to vCenter from NWS
optional arguments:
-h, --help show this help message and exit
--name NAME hostname of the vCenter server
--user USER user name for login to vCenter server
--pwd PWD password for login to vCenter server
--vm VM DNS name of VM(as shown in vSphere)
--nsruser NSRUSER user name for login to NetWorker server
--nsrpwd NSRPWD password for login to NetWorker server
--nsrauthc NSRAUTHC Remote AuthC server
--allproxies ALLPROXIES
specify to do work on peer vProxies registered
--DDhost DDHOST provide DD IP/hostname for port connectivity tests
Remarque : Vous pouvez utiliser plusieurs balises dans une commande ProxyHC, par exemple :
/home/admin/ProxyHC auth port perm tasks disk cleanup hotadd
5. Le fichier journal est généré sous /tmp/proxy-hc.log.
Additional Information
- NVP-vProxy : Utilisation de l’utilitaire vmconfig
- guide de tri NVP-vProxy : Présentation du tri et du journal NetWorker VMware Protection vProxy
- NVP vProxy : Connectivité réseau pour les opérations de sauvegarde et de restauration
- NetWorker : Dépannage de NVP vProxy - Sauvegarde et restauration des performances et du débit d’une machine virtuelle
- NVP vProxy : Informations sur la version de NetWorker vProxy
Affected Products
NetWorkerProducts
NetWorkerArticle Properties
Article Number: 000022590
Article Type: How To
Last Modified: 29 Sept 2025
Version: 14
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.