수동 모바일 광대역 활성화 지원
Summary: 이 문서에서는 활성화를 위해 모바일 광대역 카드 IMEI(International Mobile Equipment Identity) 번호를 얻는 방법에 대해 설명합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Cause
사용 가능한 원인 정보가 없습니다.
Resolution
IMEI 번호
MMB(Mobile Broadband) 또는 WWAN(Wireless Wide Area Network) 카드를 수동으로 활성화하려면 카드의 IMEI(International Mobile Equipment Identity) 번호를 받아야 합니다. 다음은 명령 프롬프트를 사용하여 IMEI 번호를 얻는 지침입니다.
- Windows 10의 경우 Windows+X 키를 누릅니다. 명령 프롬프트(관리자)를 클릭하여 관리자 모드로 엽니다.
명령 프롬프트 옵션
- 로컬 시스템에서 디바이스의 디바이스 정보를 찾으려면 명령 프롬프트에서 다음 명령을 사용합니다.
netsh mbn show interface
Enter 키를 누릅니다.
netsh mbn show interface 명령
- 장치 ID는 IMEI 번호입니다.
명령 프롬프트 디바이스 ID
WWAN 서비스가 비활성화된 경우 명령 프롬프트에 다음 메시지가 표시됩니다. "모바일 광대역 서비스(wwansvc)가 실행되고 있지 않습니다."
(wwansvc) 실행 중이 아님
서비스를 시작하는 옵션 1:
- 명령 프롬프트 명령으로 서비스를 활성화합니다.
- 명령 프롬프트를 다시 열고 다음을 입력합니다.
net start wwanSvc
Enter 키를 누릅니다.
서비스를 시작하는 옵션 2:
- Services 메뉴에서 서비스를 활성화합니다.
- 명령 프롬프트를 다시 열고 다음을 입력합니다.
services.msc
Enter 키를 누릅니다. - "WWAN AutoConfig"를 찾습니다.
WWAN 자동 구성 서비스
- WWAN Service 항목을 두 번 클릭하면 WWAN Service General 탭이 열립니다.
WWAN Service General 탭
- 시작 유형을 다음으로 변경합니다. 자동 번역.
- 시작 버튼을 클릭합니다.
- 서비스가 성공적으로 시작되면 "
netsh mbn show interface"를 눌러 IMEI 번호를 캡처합니다.
참고: IMEI 번호가 없으면 활성화를 수행할 수 없습니다. 다음 옵션(추가 문제가 발생할 수 있으므로 권장하지 않음)은 배터리와 시스템 커버를 열어 IMEI 번호 스티커를 찾는 것입니다.
이제 이동통신사(Verizon, T-Mobile, AT&T 등)에 문의하여 카드를 활성화할 수 있습니다.
Affected Products
Dell Wireless 5505-Vodafone Mobile Broadband (3G HSDPA) Mini-Card, Dell Wireless 55XX-Cingular Mobile Broadband (3G HSDPA) Mini-Card, Dell Wireless 57XX-Sprint Mobile Broadband (CDMA EV-DO) Mini-Card
, Dell Wireless 57XX-TELUS Mobile Broadband (CDMA EV-DO) Mini-Card, Dell Wireless 57XX-Verizon Mobile Broadband (CDMA EV-DO) Mini-Card
...
Article Properties
Article Number: 000130127
Article Type: Solution
Last Modified: 11 Nov 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.