LED or Light Ring on a Dell AC Adapter is Off or Flickering
Summary: The following article provides information about the correct way to troubleshoot a Dell AC adapter if the status light is off or flickering. Dell AC adapters come with a status Light Emitting Diode (LED) on the adapter or a ring of them around the connector to the device. ...
Symptoms
Adapter status LED does Not stay on or comes on and flickers if the connection is loose
Your AC adapters status LED or connector light ring is off or flickers. The power cable that plugs into the adapter brick from the wall outlet appears loose. The battery does not charge, and your device randomly shuts down when running with only the AC adapter connected.
Cause
This can be due to a poor connection of the power cable to the AC adapter.
Resolution
Confirm that the power cable is firmly seated to the AC adapter
You must verify that the AC power cable is correctly installed. Use the following steps to plug the power cable into the AC adapter:
-
Unplug the adapter cable from the device.
-
Unplug the power cable from the power source or wall outlet.
-
Remove the power cable from the AC adapter.
-
Use two hands to attach the power cable to the AC adapter. Hold the AC adapter in one hand, and place the power cable in position over the two or three prong connector on the AC adapter.

-
Using the palm of your hand you must push the power cable in fully until it clicks.

-
Reconnect the AC adapter to the power source or wall outlet. Verify the LED or light ring on the AC adapter comes on and stays on, with no flicker.
-
If the above steps fail to resolve your issue, you can use the steps in the following article link:
-
Dell Knowledge Base Article: How to Troubleshoot AC Adapter Issues on a Dell Laptop
-