VMware:使用 vCenter 將現有 VM 的 CPU 限制設為 0 會設為 0 MHz,而非無限制

Summary: 使用 vCenter 將現有虛擬機器 (VM) CPU 限制設定為 0 時,並不會停用限制。這會將其設為 0 MHz,這會導致虛擬機器不穩定,並可能導致主機需要重新開機。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

將現有 VM 的「CPU 限制」設定變更為 0 (意為停用) 時,VM 會沒有回應。VM 環境可能會維持為殭屍程序,並且可能需要主機重新開機才能釋放資源。
此外:在將此設置脫機后打開 VM,VM 將在幾分鐘內無回應。

Cause

在現有 VM 的 vCenter 中變更 CPU 限制時:不會將其視為無限制。它會將其視為 0 MHz 的 CPU 限制,不給 VM 任何 CPU 資源。

在其他情況下,例如 VM 建立以及使用 ESXi 的任何變更 - 0 都會變更為無限制。

CPU 限制為 0 MHz 的另一個原因可能是通過不提供 CPU 資源來阻止 VM 打開電源;這不起作用。VM 仍可開啟電源。

Resolution

變更 VM CPU 限制時,請務必選取無限制,而非設定 0。

Additional Information

Affected Products

VxRail, VMWare Cloud on Dell EMC VxRail E560F, VMWare Cloud on Dell EMC VxRail E560N, VMware ESXi 7.x, VMware ESXi 8.x, VxRail 460 and 470 Nodes, VxRail Appliance Family, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes , VxRail D560, VxRail D560F, VxRail E Series Nodes, VxRail E460, VxRail E560, VxRail E560 VCF, VxRail E560F, VxRail E560F VCF, VxRail E560N, VxRail E560N VCF, VxRail E660, VxRail E660F, VxRail E660N, VxRail E665, VxRail E665F, VxRail E665N, VxRail G560, VxRail G560 VCF, VxRail G560F, VxRail G560F VCF, VxRail P Series Nodes, VxRail P470, VxRail P570, VxRail P570 VCF, VxRail P570F, VxRail P570F VCF, VxRail P580N, VxRail P580N VCF, VxRail P670F, VxRail P670N, VxRail P675F, VxRail P675N, VxRail S Series Nodes, VxRail S470, VxRail S570, VxRail S570 VCF, VxRail S670, VxRail Software, VxRail V Series Nodes, VxRail V470, VxRail V570, VxRail V570 VCF, VxRail V570F, VxRail V570F VCF, VXRAIL V670F, VxRail VD-4510C, VxRail VD-4520C, VxRail VE-660, VxRail VE-6615, VxRail VP-760, VxRail VP-7625, VxRail VS-760 ...
Article Properties
Article Number: 000194055
Article Type: Solution
Last Modified: 25 Jul 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.