PowerFlex向けCloudLinkリリース7.1.5アップグレード パス
Summary: PowerFlexのお客様向けのCloudLinkリリース7.1.5アップグレード パス
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
CloudLinkリリース7.1.2より前では、再起動後にSDSドライブ文字が変更されると、暗号化マッパー名が変更され、PowerFlexデバイス エラーが発生する可能性がありました。CloudLinkで暗号化されたPowerFlex SDSデバイスのエラーが再起動後に表示されます。|Dell US
CloudLinkリリース7.1.2では、再起動中のドライブ文字の変更をより適切に処理するために、暗号化マッパー名が変更されました。 このため、CloudLinkを7.1.2にアップグレードする場合は、PowerFlexの新しいマッパー名を手動で変更する必要がありました。
このマッパーの変更は、CloudLinkリリース7.1.5で/dev/svm_sdXの元のマッパー名に戻されます。 代わりに、PowerFlex 4.0.1はデバイス エラーを発生させずにデバイス文字の変更を処理できます。
CloudLinkのアップグレード時にPowerFlexのマッパー名を手動で変更する必要がないようにするには、PowerFlexユーザーがCloudLinkを7.1または7.1.1から7.1.5に直接アップグレードし、7.1.2/7.1.3/7.1.4にはアップグレードしないことをお勧めします。
Cause
CloudLink暗号化マッパーはリリース7.1.2で変更され、リリース7.1.5で元のマッパーに戻されました。
Resolution
CloudLink 7.1または7.1.1から7.1.5に直接アップグレードします。
Affected Products
PowerFlex rack, ScaleIO, CloudLinkArticle Properties
Article Number: 000203759
Article Type: Solution
Last Modified: 18 Feb 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.