NVP vProxy - VM 등록 오류로 인해 가상 머신 이미지 복구가 계속 실패함: 서버 오류 코드: Permission to perform this operation was denied.

Summary: 최근에 업그레이드한 vCenter를 사용하여 가상 머신 이미지 복구가 지속적으로 실패합니다. 최근 vCenter 업그레이드 후 NetWorker vProxy 이미지 복구가 작동을 중지했습니다.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

NetWorker vProxy 복구 세션 로그에는 다음이 표시됩니다. 
159373:nsrvproxy_recover: vProxy Log: ####-##-#####:##:### ERROR:  [75] Error registering VM: ServerFaultCode: Permission to perform this operation was denied.
159373:nsrvproxy_recover: vProxy Log: ####-##-#####:##:### ERROR:  [75] Error in registering VM "[####l-####-SAN-Datastore] ###_1/###_1.vmx". "ServerFaultCode: Permission to perform this operation was denied."
159373:nsrvproxy_recover: vProxy Log: ####-##-#####:##:### WARN:   [75] RecoverVMSessions "####-###-###-###-113093c9524a" cleaning up running recover session due to error.
159373:nsrvproxy_recover: vProxy Log: ####-##-#####:##:### INFO:   [75] Successfully removed folder/file "[####l-####-SAN-Datastore] ###_1".
159373:nsrvproxy_recover: vProxy Log: ####-##-#####:##:### INFO:   [75] Disconnected from session on vCenter '####.###.###'.
159373:nsrvproxy_recover: vProxy Log: ####-##-#####:##:### ERROR:  [75] Failed to recover to a new VM. ServerFaultCode: Permission to perform this operation was denied.
152793:nsrvproxy_recover: vProxy Log Ends =================================================
153335:nsrvproxy_recover: Virtual machine recovery failed: vProxy recovery failed with error message: Session "####-###-###-###-113093c9524a" failed. Error: ServerFaultCode: Permission to perform this operation was denied..

vProxy 복구 로그 위치 
/opt/emc/vproxy/runtime/logs/vrecoverd
/opt/emc/vproxy/runtime/logs/recycle/vrecoverd

Cause

VMware 팀이 vCenter를 업그레이드했고 vCenter가 NMC(NetWorker Management Console) > 에 추가되었을 때 vCenter가 클라우드에 배포됨 확인란 활성화로 > 추가됨 반면 vCenter Server는 클라우드에 배포되지 않습니다.

Resolution

  1. NMC(NetWorker Management Console) 사용자 인터페이스로 이동합니다.
  2. NetWorker Administration 창을 시작합니다. 
  3. vCenter를 마우스 오른쪽 버튼으로 클릭합니다.
  4. "Modify vCenter"를 클릭합니다.
  5. "클라우드에 배포됨" 확인란의 선택을 취소합니다.
  6. VM 복원을 다시 테스트하면 성공적으로 완료됩니다.
  7. 테스트한 VM 백업
Deploy_in_Cloud.jpg

Products

NetWorker Family
Article Properties
Article Number: 000205793
Article Type: Solution
Last Modified: 12 Mar 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.