NetWorker：升級至 19.10 後，Red Hat 8 伺服器上的電子郵件通知停止運作

Summary: 將 Red Hat 8 NetWorker 伺服器升級至 NetWorker 19.10.0.1 後，保護原則電子郵件通知停止運作。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

  • NetWorker 伺服器安裝在 Red Hat 8 上：
root@nwserver:~# cat /etc/redhat-release
Red Hat Enterprise Linux release 8.9 (Ootpa)
  • NetWorker 19.10 安裝在 Red Hat 8.x 系統上。此情況可能發生在全新安裝，或從先前的 NetWorker 版本升級時。
  • NetWorker 保護原則資源是使用 Linux 設定 mail 或 mailx 命令：
protection policy mail notification
  • 在升級 NetWorker 之前，可以順利收到電子郵件通知。
  • 從 NetWorker 伺服器命令列傳送的電子郵件訊息也有收到：
root@nwserver:~# mailx -s "test email" backupadmin@domain.com < /dev/null
Null message body; hope that's ok

root@nwserver:~# tail -n 7 /var/log/maillog
Feb 14 16:13:49 nwserver sendmail[24024]: 41ELDnaE024024: from=root, size=229, class=0, nrcpts=1, msgid=<202402142113.41ELDnaE024024@nwserver.amer.lan>, relay=root@localhost
Feb 14 16:13:49 nwserver sendmail[24024]: STARTTLS=client, relay=[127.0.0.1], version=TLSv1.3, verify=FAIL, cipher=TLS_AES_256_GCM_SHA384, bits=256/256
Feb 14 16:13:49 nwserver sendmail[24025]: STARTTLS=server, relay=localhost [127.0.0.1], version=TLSv1.3, verify=NOT, cipher=TLS_AES_256_GCM_SHA384, bits=256/256
Feb 14 16:13:49 nwserver sendmail[24025]: 41ELDn4l024025: from=<root@nwserver.amer.lan>, size=490, class=0, nrcpts=1, msgid=<202402142113.41ELDnaE024024@nwserver.amer.lan>, proto=ESMTPS, daemon=MTA, relay=localhost [127.0.0.1]
Feb 14 16:13:49 nwserver sendmail[24024]: 41ELDnaE024024: to=backupadmin@domain.com, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30229, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (41ELDn4l024025 Message accepted for delivery)
Feb 14 16:13:50 nwserver sendmail[24027]: STARTTLS=client, relay=mailhub.domain.com., version=TLSv1.2, verify=OK, cipher=ECDHE-RSA-AES256-GCM-SHA384, bits=256/256
Feb 14 16:13:50 nwserver sendmail[24027]: 41ELDn4l024025: to=<backupadmin@domain.com>, ctladdr=<root@nwserver.amer.lan> (0/0), delay=00:00:01, xdelay=00:00:01, mailer=esmtp, pri=120490, relay=mailhub.domain.com. [10.10.10.10], dsn=2.0.0, stat=Sent (ok:  Message 225328373 accepted)
  • 工作流日誌 /nsr/logs/policy/POLICY_NAME/ 報告下列錯誤：
root@nwserver:~# nsr_render_log /nsr/logs/policy/Server\ Protection/workflow_Server\ backup_064001.raw
133550 02/14/2024 11:01:35 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Starting Protection Policy 'Server Protection' workflow 'Server backup'.
199800 02/14/2024 11:01:35 AM  1 5 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Consider starting action 'Server db backup', enabled 1, schedule action '1'
204318 02/14/2024 11:01:35 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Request to run the enabled action 'Server db backup' that has level configured as '1'.
201496 02/14/2024 11:01:35 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Starting the scheduled action 'Server db backup'.
123316 02/14/2024 11:01:35 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Starting action 'Server Protection/Server backup/Server db backup' with command: 'nsrdbsave -l 1'.
123321 02/14/2024 11:01:35 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Action 'Server Protection/Server backup/Server db backup's log will be in '/nsr/logs/policy/Server Protection/Server backup/Server db backup_064002.raw'.
123325 02/14/2024 11:02:25 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Action 'Server Protection/Server backup/Server db backup' succeeded.
199800 02/14/2024 11:02:25 AM  1 5 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Consider starting action 'Expiration', enabled 1, schedule action 'exec'
204318 02/14/2024 11:02:25 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Request to run the enabled action 'Expiration' that has level configured as 'exec'.
201496 02/14/2024 11:02:25 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Starting the scheduled action 'Expiration'.
5 02/14/2024 11:02:25 AM  1 1 0 0 unknown unknown LOG unrendered /bin/mailx: symbol lookup error: /bin/mailx: undefined symbol: SSLv3_client_method, version OPENSSL_1_1_0

Cause

NetWorker 19.10 的其中一個改善項目是關於 SSL。NetWorker 提供自己的 SSL 程式庫，並匯出於 networkerrc 檔案：

root@nwserver:~# cat /opt/nsr/admin/networkerrc | grep "NSR_LIBS\|LD_LIBRARY_PATH"
        NSR_LIBS=/usr/lib/nsr
        NSR_LIBS=/usr/lib/nsr/lib64
        # It must be the first entry of LD_LIBRARY_PATH otherwise it fails to load libraries.
        NSR_LIBS=/usr/lib/nsr/lib64/cst:/usr/lib/nsr/lib64
LD_LIBRARY_PATH=${NSR_LIBS}:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH

Red Hat 8.x 上的 mail 版本包含一個 SSL 程式庫，其中包括 SSv3：

root@nwserver:~# ldd /bin/mail | grep ssl
        libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007f116357b000)

root@lnx-client02:~# nm -D /lib64/libssl.so.1.1 | egrep -i "SSLv3_"
0000000000022780 T SSLv3_client_method
0000000000022760 T SSLv3_method
0000000000022770 T SSLv3_server_method
root@nwserver:~#

NetWorker 19.10 已從其程式庫中移除 SSLv3，因為這是潛在的安全性漏洞，且可能遭利用：

root@nwserver:~# nm -D /usr/lib/nsr/lib64/libssl.so.1.1 | egrep -i "SSLv"
root@nwserver:~#

Mail 套件使用的是舊的 libssl 程式庫。問題出在 mail 套件，因此是在 NetWorker 之外。

Resolution

注意：如果未收到從命令列傳送的電子郵件訊息，則必須先解決此問題，然後再繼續執行後續步驟。這需要系統和郵件或交換系統管理員進行調查。請參閱 Dell 文章 NetWorker：如何對失敗的電子郵件通知進行故障診斷。


選項 1：

交換或郵件管理員可以檢閱郵件伺服器組態，並查看是否有停用 SSLv3 改採 TLS 1.2 的選項。


選項 2：

必須在 Linux 中發佈此問題的修正 mail 或 mailx 包。Mail 必須更新，以包含 libssl ，而其不使用 SSLv3。在撰寫本 KB 時，為 Red Hat 8.x 列出的唯一一個 mail 套件是在 2019 年發佈的 mailx-12.5-29.el8.x86_64。此問題會影響此 mail 套件。

確認安裝的 mail 套件：

rpm -qa | grep mail
範例： 
root@nwserver:~# rpm -qa | grep mail
sendmail-8.15.2-34.el8.x86_64
mailcap-2.1.48-3.el8.noarch
mailx-12.5-29.el8.x86_64
procmail-3.22-47.el8.x86_64

執行下列作業，即可取得 mail 套件詳細資料： 

yum provides mail
範例： 
root@nwserver:~# yum provides mail
Updating Subscription Management repositories.
Last metadata expiration check: 1:55:22 ago on Wed 21 Feb 2024 09:35:43 AM EST.
mailx-12.5-29.el8.x86_64 : Enhanced implementation of the mailx command
Repo        : @System
Matched from:
Filename    : /bin/mail

mailx-12.5-29.el8.x86_64 : Enhanced implementation of the mailx command
Repo        : rhel-8-for-x86_64-baseos-rpms
Matched from:
Filename    : /bin/mail
如果有較新的版本可用，此套件應在作業系統更新期間自動更新。如果命令 yum provides 顯示較新的版本，您也可以嘗試： 
yum upgrade mailx


因應措施：

  1. 更新 /opt/nsr/admin/networkerrc 以包含 OS_LIBS=/lib64 in the NetWorker environment variable LD_LIBRARY_PATH。範例：  
linux86w)
        # cst path is required to locate dynamic libraries of cst (also loads internal bsafe crypto libraries).
        # It must be the first entry of LD_LIBRARY_PATH otherwise it fails to load libraries.
        # cst comes with own bsafe library. cst bsafe library version may or may not be the same
        # version of bsafe library used by other components in the product.
        NSR_LIBS=/usr/lib/nsr/lib64/cst:/usr/lib/nsr/lib64
        OS_LIBS=/lib64    
        ERLCOOKIE_HOME=/nsr/rabbitmq
        :::::::
esac

LD_LIBRARY_PATH=${OS_LIBS}:${NSR_LIBS}:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
  1. 重新啟動 NetWorker：
systemctl restart networker

Additional Information

在 Red Hat 9.x 上，一個不同的套件會提供 mail/mailx，這使用較新的 libssl 程式庫。這個較新的程式庫不使用 SSLv3。此問題無法重現，且 Red Hat 9.x 上的 NetWorker 19.10 不需要任何因應措施。

root@lnx-nwserv:~# ldd /usr/bin/mail
        linux-vdso.so.1 (0x00007fffb211a000)
        libssl.so.3 => /lib64/libssl.so.3 (0x00007fad91b73000)
        libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007fad91600000)
        libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 (0x00007fad91b1c000)
        libidn2.so.0 => /lib64/libidn2.so.0 (0x00007fad91afb000)
        libtinfo.so.6 => /lib64/libtinfo.so.6 (0x00007fad91acb000)
        libc.so.6 => /lib64/libc.so.6 (0x00007fad91200000)
        libz.so.1 => /lib64/libz.so.1 (0x00007fad91aaf000)
        libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007fad91525000)
        libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00007fad91a96000)
        libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00007fad91a8f000)
        libkrb5support.so.0 => /lib64/libkrb5support.so.0 (0x00007fad91a7e000)
        libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00007fad91a77000)
        libresolv.so.2 => /lib64/libresolv.so.2 (0x00007fad91a61000)
        libunistring.so.2 => /lib64/libunistring.so.2 (0x00007fad9107b000)
        /lib64/ld-linux-x86-64.so.2 (0x00007fad91d2e000)
        libselinux.so.1 => /lib64/libselinux.so.1 (0x00007fad91a34000)
        libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007fad91489000)

root@lnx-nwserv:~# nm -D /lib64/libssl.so.3 | egrep -i "SSLv3_" 
root@lnx-nwserv:~#

請參閱 Dell 文章：NetWorker：NSRWORKFLOW NSR 嚴重 無法統計檔案 /usr/bin/mail （需要以註冊客戶身分登入 Dell 支援才能檢視本文）

Affected Products

NetWorker

Products

NetWorker Family, NetWorker Series
Article Properties
Article Number: 000222081
Article Type: Solution
Last Modified: 22 May 2025
Version:  13
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.