ECS: OBS: Een NTP-server toevoegen of verwijderen

Summary: In dit artikel wordt beschreven hoe u de ECS NTP-configuratie wijzigt.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Belangrijke opmerking: Er is een nieuwe functie uitgebracht in xDoctor 4-8.104.0 en hoger. Deze Knowledge Base (KB) is nu geautomatiseerd met xDoctor om snel te proberen een NTP-server toe te voegen of te verwijderen. Als het script geen NTP-server kan toevoegen of verwijderen, biedt het een gedetailleerde samenvatting van de bevindingen.  
Volg het artikel ECS ObjectScale voor meer informatie: KB Automation Scripts uitvoeren (automatische piloot) (aanmelden bij Dell Support als een geregistreerde gebruiker is mogelijk vereist.)
 
  1. Om het NAN IP-adres te vinden, kunt u het IP-adres gebruiken dat in de waarschuwing wordt geïdentificeerd of van getclusterinfo -i voor uw doel met dit script.
Opdracht: 
# getclusterinfo -i
Voorbeeld: 
admin@ecsnode1:~> getclusterinfo -i

Registered Racks
================

Ip Address        epoxy   seg mac             seg color    seg id    NAN Hostname
===============   =====   =================   ==========   =======   ============
169.xxx.1.1      False   00:00:00:00:00:00   red          1         provo-red.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.101   169.xxx.1.1       provo-red
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.1.2       sandy-red
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.1.3       orem-red
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.1.4       ogden-red
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.1.5       layton-red
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.1.6       logan-red
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.1.7       lehi-red
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.1.8       murray-red
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer


169.xxx.2.1      False   00:00:00:00:00:00   green        2         tucson-green.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.219.101   169.xxx.2.1       provo-green
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.2.2       sandy-green
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.2.3       orem-rgreen
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.2.4       ogden-green
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.2.5       layton-green
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.2.6       logan-green
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.2.7       lehi-green
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.2.8       murray-green
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer
  1. Voer de automatiseringsopdracht uit vanaf het controleknooppunt met xDoctor 4-8.104.0 en hoger.
 
Opmerking: --target-rack wordt ondersteund voor deze actie, is dit script opgenomen in de xDoctor4.8.104.0-release, die versie 3.0 van de Ansible Automation-scripts bevat.
 
Opdracht: 
# sudo xdoctor autopilot --kb 273244 --target-rack <rack color>
Voorbeeld: (Dit voorbeeld werkt op rack 1.) 
admin@ecsnode1:~> sudo xdoctor autopilot --kb 273244 --target-rack red

Using /etc/ansible/ansible.cfg as config file
VERSION: 3.0
Playbook tasks: 66
Role tasks: 28
Total tasks: 94 across 1 host(s)


Optie voor automatiseringsscript:

  1. Selecteer de optie die u wilt doen, Een NTP-server toevoegen aan de configuratie of Een NTP-server verwijderen uit de configuratie.
Voorbeeld: 
TASK [Ask user if they want to add or remove an NTP server] **************************************************************************************************************************************************
[Ask user if they want to add or remove an NTP server]
******************************************************************************
Please select one of the following options to add or remove an NTP server:
******************************************************************************
(1) Add an NTP server to the configuration.
(2) Remove an NTP server from the configuration.

(0) Exit
******************************************************************************
  1. Configuratie NTP-server wijzigen:
-> (1) Add an NTP server IP or FQDN

TASK [Ask for NTP server IP or FQDN if adding] ***************************************************************************************************************************************************************
[Ask for NTP server IP or FQDN if adding]
******************************************************************************
Enter the IP or FQDN of the NTP server:
******************************************************************************
:127.0.0.1

...

TASK [NTP server was successfully added or removed summary] **************************************************************************************************************************************************
ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "The IP or FQDN address 127.0.0.1 was successfully added to the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}
  1. Configuratie NTP-server wijzigen:
->(2) Remove an NTP server from the configuration.

TASK [Prompt user to select NTP server to remove] ************************************************************************************************************************************************************
[Prompt user to select NTP server to remove]
******************************************************************************
Enter the letter of the NTP server you want to remove:
******************************************************************************
(a) 127.0.0.1
(b) x.x.x.x

(0) Exit
******************************************************************************
(a)

ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "127.0.0.1 was successfully removed from the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}


IP's toevoegen aan NTP:

Voer de onderstaande opdracht eenmaal uit om het IP-adres van de NTP-server toe te voegen. Herhaal de opdracht voor elke NTP-server (of scheid met spatie).
Opdracht: 
# sudo setrackinfo -a NTPServer <NTP_Server_IP>
Voorbeeld: 
# sudo setrackinfo -a NTPServer 10.3.4.5

Controleer de resultaten met behulp van getrackinfo -r 
# getrackinfo -r
Rack Master Info
================
ChassisID = 00:01:02:63:1d:1e
RackID = 1
RackName = red
epoxy = False

Basic Config:
-------------
        EcsManagedBmc = no
        RackInstallServer = no

Network Config:
---------------
        DNSSearch =  corp.dell.com dell.com
        DNSServer =  x.x.x.x y.y.y.y
        NTPServer =  x.x.x.x

System Config:
--------------
        NANDomain = nan
        NANNetwork = 169.xxx.0.0/16
        NANVlan = 4
        PublicVlan = 1
        RackFirstNode = 1
        RackLastNode = 24
        RackNetwork = 192.xxx.xxx.0/24
        RackSwitchCommunityName = public
        RackVlan = 0


IP-adressen verwijderen uit NTP-configuratie:

Gebruik de onderstaande opdracht om een of meer NTP IP's te verwijderen:
Opdracht: 
# sudo setrackinfo -d NTPServer <NTP_Server_IP>
Voorbeeld: 
# sudo setrackinfo -d NTPServer 10.3.4.5

Additional Information

Zie artikel ECS voor DNS-configuratie: Een DNS-server toevoegen of verwijderen.

Affected Products

ECS Appliance

Products

ECS, ECS Appliance Gen 3, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption
Article Properties
Article Number: 000273244
Article Type: How To
Last Modified: 14 Aug 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.