ECS: OBS: Hur man lägger till eller tar bort en NTP-server

Summary: Den här artikeln visar hur du ändrar ECS NTP-konfigurationen.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Viktig information: En ny funktion har släppts i xDoctor 4-8.104.0 och senare. Denna kunskapsbas (KB) är nu automatiserad med xDoctor för att snabbt försöka lägga till eller ta bort NTP-servern. Om skriptet inte kan lägga till eller ta bort NTP-servern ger det en detaljerad sammanfattning av resultaten.  
Om du vill ha mer information följer du artikeln ECS ObjectScale: Köra KB Automation-skript (autopilot) (inloggning till Dells support som registrerad användare kan krävas.)
 
  1. Om du vill hitta NAN-IP-adressen kan du använda IP-adressen som identifieras i aviseringen eller från getclusterinfo -i för målet med det här skriptet.
Kommando: 
# getclusterinfo -i
Exempel: 
admin@ecsnode1:~> getclusterinfo -i

Registered Racks
================

Ip Address        epoxy   seg mac             seg color    seg id    NAN Hostname
===============   =====   =================   ==========   =======   ============
169.xxx.1.1      False   00:00:00:00:00:00   red          1         provo-red.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.101   169.xxx.1.1       provo-red
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.1.2       sandy-red
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.1.3       orem-red
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.1.4       ogden-red
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.1.5       layton-red
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.1.6       logan-red
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.1.7       lehi-red
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.1.8       murray-red
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer


169.xxx.2.1      False   00:00:00:00:00:00   green        2         tucson-green.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.219.101   169.xxx.2.1       provo-green
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.2.2       sandy-green
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.2.3       orem-rgreen
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.2.4       ogden-green
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.2.5       layton-green
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.2.6       logan-green
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.2.7       lehi-green
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.2.8       murray-green
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer
  1. Kör automatiseringskommandot från kontrollnoden med xDoctor 4-8.104.0 och senare.
 
Obs! --target-rack stöds för den här åtgärden ingick det här skriptet i xDoctor4.8.104.0-versionen, som innehåller version 3.0 av Ansible-automatiseringsskripten.
 
Kommando: 
# sudo xdoctor autopilot --kb 273244 --target-rack <rack color>
Exempel: (Det här exemplet körs på rack 1.) 
admin@ecsnode1:~> sudo xdoctor autopilot --kb 273244 --target-rack red

Using /etc/ansible/ansible.cfg as config file
VERSION: 3.0
Playbook tasks: 66
Role tasks: 28
Total tasks: 94 across 1 host(s)


Alternativ för automatiseringsskript:

  1. Välj det alternativ som du vill göra, Lägg till en NTP-server i konfigurationen eller Ta bort en NTP-server från konfigurationen.
Exempel: 
TASK [Ask user if they want to add or remove an NTP server] **************************************************************************************************************************************************
[Ask user if they want to add or remove an NTP server]
******************************************************************************
Please select one of the following options to add or remove an NTP server:
******************************************************************************
(1) Add an NTP server to the configuration.
(2) Remove an NTP server from the configuration.

(0) Exit
******************************************************************************
  1. Ändra NTP-serverkonfiguration:
-> (1) Add an NTP server IP or FQDN

TASK [Ask for NTP server IP or FQDN if adding] ***************************************************************************************************************************************************************
[Ask for NTP server IP or FQDN if adding]
******************************************************************************
Enter the IP or FQDN of the NTP server:
******************************************************************************
:127.0.0.1

...

TASK [NTP server was successfully added or removed summary] **************************************************************************************************************************************************
ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "The IP or FQDN address 127.0.0.1 was successfully added to the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}
  1. Ändra NTP-serverkonfiguration:
->(2) Remove an NTP server from the configuration.

TASK [Prompt user to select NTP server to remove] ************************************************************************************************************************************************************
[Prompt user to select NTP server to remove]
******************************************************************************
Enter the letter of the NTP server you want to remove:
******************************************************************************
(a) 127.0.0.1
(b) x.x.x.x

(0) Exit
******************************************************************************
(a)

ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "127.0.0.1 was successfully removed from the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}


Så här lägger du till IP-adresser till NTP:

Kör kommandot nedan en gång för att NTP-serverns IP-adress ska läggas till. Upprepa kommandot för varje NTP-server (eller separera med blanksteg).
Kommando: 
# sudo setrackinfo -a NTPServer <NTP_Server_IP>
Exempel: 
# sudo setrackinfo -a NTPServer 10.3.4.5

Kontrollera resultaten med hjälp av getrackinfo -r 
# getrackinfo -r
Rack Master Info
================
ChassisID = 00:01:02:63:1d:1e
RackID = 1
RackName = red
epoxy = False

Basic Config:
-------------
        EcsManagedBmc = no
        RackInstallServer = no

Network Config:
---------------
        DNSSearch =  corp.dell.com dell.com
        DNSServer =  x.x.x.x y.y.y.y
        NTPServer =  x.x.x.x

System Config:
--------------
        NANDomain = nan
        NANNetwork = 169.xxx.0.0/16
        NANVlan = 4
        PublicVlan = 1
        RackFirstNode = 1
        RackLastNode = 24
        RackNetwork = 192.xxx.xxx.0/24
        RackSwitchCommunityName = public
        RackVlan = 0


Så här tar du bort IP-adresser från NTP-konfigurationen:

Använd kommandot nedan för att ta bort en eller flera NTP-IP-adresser:
Kommando: 
# sudo setrackinfo -d NTPServer <NTP_Server_IP>
Exempel: 
# sudo setrackinfo -d NTPServer 10.3.4.5

Additional Information

Information om DNS-konfiguration finns i artikeln ECS: Hur man lägger till eller tar bort en DNS-server.

Affected Products

ECS Appliance

Products

ECS, ECS Appliance Gen 3, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption
Article Properties
Article Number: 000273244
Article Type: How To
Last Modified: 14 Aug 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.