Isilon：如何檢查電源供應器是否故障？

Summary: 如何檢查電源供應器是否故障

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

若要檢查電源供應器是否真正故障：
  1. 在叢集的任何節點上開啟 SSH 連線，然後使用 root 帳戶登入。
  2. 執行下列命令：

若要檢查單一節點上的電源供應器狀態：

# isi_hw_status | grep -i -A2 "Power Supplies"

Power Supplies OK
Power Supply 1 good
Power Supply 2 good
若要檢查所有節點上的電源供應器狀態：
  
# isi_for_array -s isi_hw_status | grep -i -A2 "Power Supplies"

RTPIsilon02-1: Power Supplies OK
RTPIsilon02-1: Power Supply 1 good
RTPIsilon02-1: Power Supply 2 good
--
RTPIsilon02-2: Power Supplies OK
RTPIsilon02-2: Power Supply 1 good
RTPIsilon02-2: Power Supply 2 good


在上述輸出結果中，我們發現所有電源供應器都正常。因此不需要採取任何行動。

如果所有電源供應器都正常。清除錯誤警示並監視叢集 24 小時

若要清除特定的電源供應器警示
請使用下列命令取得群組 id

# isi event groups list

ID   Started     Ended       Causes Short                  Lnn  Events  Severity
-----------------------------------------------------------------------------------
3074 01/01 00:25 01/01 00:25 POWER Supply Failed           4    1      Critical

 

# isi event groups modify --resolved=yes --ignore=yes --id=

Eg : isi event groups modify --resolved=yes --ignore=yes --id=3074



若要整個叢集上的所有舊警示

若為 OneFS 7.x.x.x

# isi events cancel all
# isi events quiet all




若為 OneFS 8.x.x.x

# isi event bulk --ignore=true
# isi event bulk --resolved=true

 

 

Additional Information

如果您在輸出結果中發現電源供應器故障，請聯絡 Isilon 支援以進行更換。

請亦觀看此 YouTube 影片：

Affected Products

Isilon, PowerScale OneFS
Article Properties
Article Number: 000020717
Article Type: How To
Last Modified: 17 Mar 2023
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.