VNX: nas_ckpt_schedule kommandoen -report -fields fungerer ikke længere efter NAS-kodeopgradering (kan rettes af brugeren)

Summary: /nas/bin/nas_ckpt_schedule -report -fields name,pfsId,times <= command no longer returns expected output. It only provides headers of 'name,pfsID,time' without interpreting the command. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

 NAS-kodeopgradering fra VNX File Operating Environment (OE) 8.1.9.121 til File OE 8.1.9-211.

Efter opgradering af VNX-fil OE fra 8.1.9.121 til VNX-fil OE 8.1.9-211 returnerer følgende kommando ikke længere et output. Det returnerer kun en 'header' i standardoutputtet.

Version: 8.1.9-217

[nasadmin@CS0 ~]$ /nas/bin/nas_ckpt_schedule -report -fields name,pfsId,times
"name","pfsId","times"   

Bemærk, at kommandoen ikke længere returnerede det forventede output. Det giver kun 'name,pfsID,time' overskrifter uden at fortolke kommandoen. 

Cause

Dette spørgsmål er ved at blive undersøgt.

Resolution

En løsning er at tilføje "cvfsPrefix", hvorefter kommandoen vises korrekt:


[nasadmin@CS0 ~]$ /nas/bin/nas_ckpt_schedule -report -fields name,pfsId,times,unit,cvfsPrefix
"name","pfsId","times","unit","cvfsPrefix"
"sch1","3864","18:15","DAYS",""


 

Affected Products

VNX2 Series

Products

VNX2 Series, VNX5400
Article Properties
Article Number: 000032887
Article Type: Solution
Last Modified: 21 Aug 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.