VNX：NAS 程式碼升級後，nas_ckpt_schedule -report -fields 命令已無法運作 （使用者可修正）

Summary: /nas/bin/nas_ckpt_schedule -report -fields name，pfsId，times <= command no longer returns expected output. It only provides headers of 'name,pfsID,time' without interpreting the command. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

 NAS 程式碼從 VNX 檔案作業環境 （OE） 8.1.9.121 升級至檔案 OE 8.1.9-211。

將 VNX File OE 從 8.1.9.121 升級至 VNX File OE 8.1.9-211 後，下列命令不再傳回輸出。它只在標準輸出中返回一個「標頭」。

版本：8.1.9-217

[nasadmin@CS0 ~]$ /nas/bin/nas_ckpt_schedule -report -fields name,pfsId,times
"name","pfsId","times"   

請注意，該命令不再返回預期的輸出。它僅提供 'name,pfsID,time' 不解釋命令的標頭。 

Cause

此問題正在調查中。

Resolution

一種因應措施是新增「cvfsPrefix」，這樣命令便會正確顯示：


[nasadmin@CS0 ~]$ /nas/bin/nas_ckpt_schedule -report -fields name,pfsId,times,unit,cvfsPrefix
"name","pfsId","times","unit","cvfsPrefix"
"sch1","3864","18:15","DAYS",""


 

Affected Products

VNX2 Series

Products

VNX2 Series, VNX5400
Article Properties
Article Number: 000032887
Article Type: Solution
Last Modified: 21 Aug 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.