VNX：NAS 代码升级后，nas_ckpt_schedule -report -fields 命令不再起作用（用户可纠正）

Summary: /nas/bin/nas_ckpt_schedule -report -fields name，pfsId，times <= command no longer returns expected output. It only provides headers of 'name,pfsID,time' without interpreting the command. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

 NAS 代码从 VNX File Operating Environment （OE） 8.1.9.121 升级到 File OE 8.1.9-211。

将 VNX File OE 从 8.1.9.121 升级到 VNX File OE 8.1.9-211 后，以下命令不再返回输出。它只在标准输出中返回一个“header”。

版本：8.1.9-217

[nasadmin@CS0 ~]$ /nas/bin/nas_ckpt_schedule -report -fields name,pfsId,times
"name","pfsId","times"   

请注意，该命令不再返回预期的输出。它仅提供 'name,pfsID,time' 标头，而不解释命令。 

Cause

此问题正在调查中。

Resolution

一种解决方法是添加“cvfsPrefix”，然后命令会正确显示：


[nasadmin@CS0 ~]$ /nas/bin/nas_ckpt_schedule -report -fields name,pfsId,times,unit,cvfsPrefix
"name","pfsId","times","unit","cvfsPrefix"
"sch1","3864","18:15","DAYS",""


 

Affected Products

VNX2 Series

Products

VNX2 Series, VNX5400
Article Properties
Article Number: 000032887
Article Type: Solution
Last Modified: 21 Aug 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.