Data Domain: MTREE çoğaltması, başlatma sırasında yanlış Bytes_remaining gösteriyor

Summary: MTREE çoğaltması, başlatma sırasında yanlış bytes_remaining gösteriyor.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

MTREE Çoğaltması, çoğaltma sırasında hiç kullanılmayan eski MTREE'ler için başlatma işlemi sırasında yanlış baytlar gösteriyor.

The following MTREE has been used [# mtree list]:
/data/col1/support           5965.4   RW

İstatistikler, yukarıdaki adımları kullanarak yeni bir MTREE çoğaltması oluşturduktan sonra 92 TB kalan veriyi göstermektedir:

# replication show detailed-stats rctx://1
CTX:1
Destination:                               
mtree://dd-dr.support.com/data/col1/support
Network bytes sent to destination:          2,287,577,928
Pre-compressed bytes written to source:     92,046,090,413,266
Pre-compressed bytes sent to destination:   2,860,770,559
Bytes after synthetic optimization:         2,860,770,559
Bytes after filtering by destination:       2,253,845,068
Bytes after low bandwidth optimization:     2,253,845,068
Bytes after local compression:              2,258,791,288
Pre-compressed bytes remaining:             92,043,229,642,707   <----
Compression ratio:                          1.3
Sync'ed-as-of time:                         (initializing)

Temel alınan kayıt defteri anahtarları daha doğru baytlar gösterirken:

repl.001.src_host = dd-prod.support.com
repl.001.src_path = /data/col1/support
repl.001.dst_host = dd-dr.support.com
repl.001.dst_path = /data/col1/support
repl.001.progress.task_name = initializing 3/3
repl.001.progress.init_vbytes = 5991145719813   <---

Şu ddfs.info:
Initial virtual bytes estimation looks OK:

09/21 10:58:45.157 (tid 0x2b0e208796e0): repl ctx 1: mrepl_create_init_snap creating initial snapshot.
09/21 10:58:48.068 (tid 0x2b0e208796e0): repl ctx 1: estimating init vbytes as 5991145719813
09/21 10:58:48.995 (tid 0x2b0e208796e0): repl ctx 1: Using init_resync_snapid 1433317767:1886. Total snap count = 2, curent snap cnt = 0.

Birkaç dakika sonra, normal seyri mrepl_sends görünmeye başlar:

09/21 11:19:04.136 (tid 0x327e760): repl ctx 1:3: mrepl_send_file: file 30:0:ac66:0:a30e9f46:556eb187:1d74 took 218 sec, net throughput 297 KB/s, virtual throughput 290 KB/s, refs_sent 7575, refs_features_sent 0, segs_sent 0, segs_features_sent 7575, size 63416832, vbytes 63416832, nbytes 64858812 (recid 361) (ch-xor 0x98f3c7e9) (hole_seen FALSE)
09/21 11:19:59.031 (tid 0x2b0e2083cde0): repl ctx 1:16: mrepl_send_file: file 30:0:ac68:0:fccc10a6:556eb187:1d74 took 237 sec, net throughput 286 KB/s, virtual throughput 280 KB/s, refs_sent 7908, refs_features_sent 0, segs_sent 0, segs_features_sent 7908, size 66419200, vbytes 66419200, nbytes 67938672 (recid 363) (ch-xor 0x462a1211) (hole_seen FALSE)

Bir sonraki oluşum vbytes_remain Farklı bir boyut gösterir:

09/21 11:28:02.246 (tid 0x2b0e096ba050): repl ctx 1: mrepl_stats_local: vbytes_remain: 92036838018199

Cause

Başlatma işlemi, MTREE'nin oluşturulma zamanından kalan mantıksal baytları hesaplamak için tasarlanmıştır. Oluşturmadan MTREE çoğaltma kurulumuna kadar yaklaşık 92 TB veri alımı ve kümülatif yazma işlemi gerçekleşti ve bu, mevcut MTREE boyutunun çok üzerindeydi.

Resolution

Kalan mantıksal baytları hesaplamak için çoğaltma bu şekilde tasarlanmıştır. Bu uyumsuzluk, kullanıcı eski bir MTREE'yi her çoğaltmaya başladığında gözlemlenir. Ancak bu, MTREE çoğaltmasının bu verileri çoğalttığını göstermez; yalnızca MTREE'nin şu şekilde gösterildiği gibi mevcut boyutunu çoğaltır: init_vbytes_remain

Başlatma aşaması sona erdiğinde, sıfırlayın vbytes_remain 0'a ve ayrıca güncelleyin vbytes_written_and_replicated ile cum_raw_bytes Bu nedenle, sonraki yedeklemeler gerçekçi olmayan istatistikler göstermez, bunun yerine yalnızca alınan yeni verileri raporlar.

Affected Products

Data Domain

Products

Data Domain
Article Properties
Article Number: 000042735
Article Type: Solution
Last Modified: 07 Jan 2026
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.