Connectrix MDS -sarja: Moduuli X ilmoitti varoituksen lämpötila-anturin ajurivirheen vuoksi

Summary: Connectrix MDS -sarja: Moduulin X ilmoittama varoitus lämpötila-anturin ajurivirheen vuoksi laitteessa 49 (laitevirhe 0xc310020b)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Yhdessä kytkinmoduulissa on useita antureita, mutta moduuli on ylhäällä.

`show module`
Mod  Ports  Module-Type                         Model              Status
---  -----  ----------------------------------- ------------------ ----------
x   48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok

show logging log:
%MODULE-4-MOD_WARNING: Module X  reported warning due to Temperature sensor driver error in device 49 (device error 0xc310020b)

 ********* Exception info for module X ********
exception information --- exception instance 1 ----
Module Slot Number: X
Device Id         : 49
Device Name       : Temperature-sensor
Device Errorcode  : 0xc3103217
Device ID         : 49 (0x31)
Device Instance   : 03 (0x03)
Dev Type (HW/SW)  : 02 (0x02)
ErrNum (devInfo)  : 23 (0x17)
System Errorcode  : 0x40380022 TempSensor on this module failed (or inaccessible)
Error Type        : Minor error
PhyPortLayer      :
Port(s) Affected  :
DSAP              : 39 (0x27)
UUID              : 24 (0x18)
Time              : Fri May 19 20:38:38 2017
                    (Ticks: 591F900E jiffies)
 
Temperature:
--------------------------------------------------------------------
Module   Sensor        MajorThresh   MinorThres   CurTemp     Status
                       (Celsius)     (Celsius)    (Celsius)        
--------------------------------------------------------------------
11       Outlet1         n/a             n/a         n/a        Failure       
11       Outlet2         n/a             n/a         n/a        Failure       
11       Intake1         n/a             n/a         n/a        Failure  
 

Cause

Kytkinmoduulin anturivika

Resolution

  1. Lataa moduuli, jota ongelma koskee, uudelleen. Tämä häiritsee moduulin läpi kulkevaa liikennettä.
  2. Jos tila jatkuu moduulin uudelleenlatauksen jälkeen, vaihda moduuli.
     

Jos ongelma jatkuu, ota yhteyttä Dell Technology -asiakaspalvelun edustajaan tai Dell Technology -asiakastukikeskukseen saadaksesi teknistä tukea ja lataa kytkinlokit palvelupyyntöön, jotta tukihenkilöstö voi tarkistaa ne ja antaa sinulle palautetta. Mainitse tämän ratkaisun tunnus 000052605. 

Affected Products

Connectrix MDS-Series Firmware

Products

Connectrix MDS-Series Firmware, Connectrix MDS-Series Hardware
Article Properties
Article Number: 000052605
Article Type: Solution
Last Modified: 20 Oct 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.