主機在 PPME 遷移期間當機,遷移狀態在 TargetLUfault 中。

Summary: 在進行 PPME 遷移且在 powermig 資訊中收到 TargetLUfault 錯誤時,伺服器停止回應。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

- 應用 MS 修補程式。
  • 若要解決此問題 Microsoft我們需要為 VDS 服務和 StorPort hotfix 套用 hotfix。請在下面套用兩個修補程式:
 


https://support.microsoft.com/en-gb/help/2468345/computer-intermittently-performs-poorly-or-stops-responding-when-the-storport-driver-is-used-in-windows-server-2008-r2


在進行 PPME 遷移且在 powermig 資訊中收到 TargetLUfault 錯誤時,伺服器停止回應。


06/08/2017 07:19:56 PM 錯誤 ServerName 7034 服務控制管理員 EMC PowerPath Migration Service 5.7.4 服務意外終止。    它已經這樣做了 1 次。
06/08/2017 07:19:07 PM 資訊 伺服器名稱 7036 服務控制管理員 Microsoft 軟體卷影複製提供程式服務已進入停止狀態。
06/08/2017 07:16:07 PM 資訊 伺服器名稱 7036 服務控制管理員 卷影複製服務進入停止狀態。
06/08/2017 07:08:23 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
06/08/2017 07:07:58 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
06/08/2017 07:07:57 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
06/08/2017 07:07:56 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018



「powermig info -all」中的錯誤 ********


** POWERMIG INFO -ALL **


=========================================================Hnd 來源 目標技術狀態 DevFault
=== ========= ========= ======== ===== =============
  4 硬碟1 硬碟2 HostCopy 設定目標LUfault 
 

Cause

伺服器參與要遷移的 LUN 備份。PPME 在遷移資料時不支援此功能。

1) 在系統事件記錄下,發現 VDS (虛擬磁碟服務) 在 PPME 進入目標前失敗數次LUfault


06/08/2017 07:19:56 PM 錯誤 ServerName 7034 服務控制管理員 EMC PowerPath Migration Service 5.7.4 服務意外終止。  它已經這樣做了 1 次。
06/08/2017 07:19:07 PM 資訊 伺服器名稱 7036 服務控制管理員 Microsoft 軟體卷影複製提供程式服務已進入停止狀態。
06/08/2017 07:16:07 PM 資訊 伺服器名稱 7036 服務控制管理員 卷影複製服務進入停止狀態。
06/08/2017 07:08:23 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
06/08/2017 07:07:58 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
06/08/2017 07:07:57 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
06/08/2017 07:07:56 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
 
06/08/2017 05:06:47 PM 資訊 伺服器名稱 7036 服務控制管理員 虛擬磁碟服務進入執行中狀態。
06/08/2017 05:06:47 PM 資訊 伺服器名稱 虛擬磁碟服務服務已啟動。
06/08/2017 04:34:13 PM 錯誤 ServerName 虛擬磁碟服務 VDS 無法宣告磁碟 (\\?\scsi#disk&ven_emc∏_power&#{4a54205a-c920-4e28-88c5-9a6296a74b0b}&emcp&power5#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}),因為發生錯誤。錯誤代碼:
80070015@0200000F06/08/2017 04:34:13 PM 錯誤 ServerName 虛擬磁碟服務 意外失敗。Error code: 15@02000018
06/08/2017 04:34:13 PM 錯誤 ServerName 虛擬磁碟服務 未預期供應商失敗。重新啟動服務可能可以解決問題。Error code: 80070015@02000014

2) Storport hotfix 也未套用至 伺服器


Resolution

下列事項應有助於避免在 PPME 遷移期間發生上述問題:
  • 請務必滿足所有先決條件,再根據 PPME 指南進行 PPME 遷移
  • 禁用伺服器上運行的 SQL 和 ASR 的資料庫備份。PPME 不應在具有備份或防毒軟體的伺服器上同時執行。請先停用,直到 PPME 完成。
  • 確定 Symmetrix 旗標已按照 KB # 正確設定,Windows Server 2003、2008 和 2012 Microsoft需要哪些 Symmetrix 導向器旗標 (位元)?
  • 清理遷移。 Powermig 清理手柄 4
  • 下載 Powerpath 6.1。
  • 使用命令列 (<EMC_Powerpath_6.1._ EXE> /r) 解除安裝較舊的 Powerpath 5.7SP4
  • 重新啟動
  • 安裝 Powerpath 6.1
  • 如「變更」一節下所述,套用兩個 MS Storport 修補程式。

https://support.microsoft.com/en-gb/help/2468345/computer-intermittently-performs-poorly-or-stops-responding-when-the-storport-driver-is-used-in-windows-server-2008-r2
  • 停止繁重的資料庫備份和防病毒。
  • 重新初始化 PPME。

Affected Products

PowerPath
Article Properties
Article Number: 000054845
Article Type: Solution
Last Modified: 20 Oct 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.