RecoverPoint For VMs: 하나의 복제본이 이미지 액세스 상태이고 여러 복제본이 있는 정합성 보장 그룹은 오류 상태입니다

하나의 타겟 복제본에서 이미지 액세스 또는 직접 액세스를 활성화한 후 소스 VMDK의 크기를 조정합니다.

하나의 타겟 복제본이 이미지 액세스 또는 직접 액세스에 있는 동안 여러 타겟 복제본이 있는 CG에서 오류가 발생합니다.

Group state:
Group5:
Enabled: YES
Transfer source:N/A
Copy:
  Copy1-prod:
    Enabled: YES
    Active primary RPA: RPA 1
    Storage access: DIRECT ACCESS (marking data)
  Copy2-DR-Test-copy:
    Enabled: YES
nbsp;   Active primary RPA: RPA 1
    Storage access: DIRECT ACCESS (marking data)
  Copy2-DR-copy:
    Enabled: YES
    Active primary RPA: RPA 1
    Journal: DISTRIBUTING PRE REPLICATION IMAGE
    Storage access: NO ACCESS
    Max journal size: 1.09 TB
  Link:
    Copy1-prod->Copy2-DR-Test-copy:
    Data Transfer: PAUSED

    Sync mode:N/A
    Copy1-prod->Copy2-DR-copy:
    Data Transfer: ERROR

/files/home/kos/control/result.log

2020/03/11 02:59:31.128 - #2 - 5464/4327 - ControlAction: GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1): RC_closePipe. GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) completed flushing transfer buffer
2020/03/11 02:59:31.128 - #2 - 5464/4327 - WorkManager: GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1): calling RC closePipe
2020/03/11 02:59:31.129 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_CLOSED, reason=One or more vmdks are in mismatch -> PT_CLOSED, reason=Re-starting transfer to RPA at other side

2020/03/11 05:38:47.425 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_FLUSH_CLOSE, reason=One or more VMDKs need to be resized -> PT_CLOSED, reason=One or more VMDKs need to be resized
2020/03/11 05:45:44.613 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_CLOSED, reason=One or more VMDKs need to be resized -> PT_FLUSH_CLOSE, reason=One or more VMDKs need to be resized
Log collector entry(7981-1): TargetState Changed detected. pipe target stabilized. groupCopyID= GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) , boxRole= KBox1 , override= TRANSFER_DETACHED, reason=One or more VMDKs need to be resized
2020/03/11 05:45:54.041 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_FLUSH_CLOSE, reason=One or more VMDKs need to be resized -> PT_CLOSED, reason=One or more VMDKs need to be resized

하나의 복사본이 이미지 액세스에 있는 동안 소스 VMDK의 크기가 조정되었으며 CG는 이미지 액세스가 비활성화될 때까지 이 변경을 처리할 수 없습니다.

해결 방법:
활성화된 복제본에서 이미지 액세스를 비활성화합니다.

해상도:
RecoverPoint for Virtual Machines가 예상대로 작동하고 있습니다.