VM'ler için RecoverPoint: Bir kopya görüntü erişimindeyken birden fazla kopya Hata durumunda olan Tutarlılık Grubu

Bir hedef kopyada görüntü erişimini veya doğrudan erişimi etkinleştirdikten sonra kaynak VMDK'yi yeniden boyutlandırın.

Birden çok hedef kopyaya sahip CG, bir hedef kopya görüntü erişiminde veya doğrudan erişimdeyken hata veriyor.

Group state:
Group5:
Enabled: YES
Transfer source:N/A
Copy:
  Copy1-prod:
    Enabled: YES
    Active primary RPA: RPA 1
    Storage access: DIRECT ACCESS (marking data)
  Copy2-DR-Test-copy:
    Enabled: YES
nbsp;   Active primary RPA: RPA 1
    Storage access: DIRECT ACCESS (marking data)
  Copy2-DR-copy:
    Enabled: YES
    Active primary RPA: RPA 1
    Journal: DISTRIBUTING PRE REPLICATION IMAGE
    Storage access: NO ACCESS
    Max journal size: 1.09 TB
  Link:
    Copy1-prod->Copy2-DR-Test-copy:
    Data Transfer: PAUSED

    Sync mode:N/A
    Copy1-prod->Copy2-DR-copy:
    Data Transfer: ERROR

/files/home/kos/control/result.log

2020/03/11 02:59:31.128 - #2 - 5464/4327 - ControlAction: GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1): RC_closePipe. GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) completed flushing transfer buffer
2020/03/11 02:59:31.128 - #2 - 5464/4327 - WorkManager: GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1): calling RC closePipe
2020/03/11 02:59:31.129 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_CLOSED, reason=One or more vmdks are in mismatch -> PT_CLOSED, reason=Re-starting transfer to RPA at other side

2020/03/11 05:38:47.425 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_FLUSH_CLOSE, reason=One or more VMDKs need to be resized -> PT_CLOSED, reason=One or more VMDKs need to be resized
2020/03/11 05:45:44.613 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_CLOSED, reason=One or more VMDKs need to be resized -> PT_FLUSH_CLOSE, reason=One or more VMDKs need to be resized
Log collector entry(7981-1): TargetState Changed detected. pipe target stabilized. groupCopyID= GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) , boxRole= KBox1 , override= TRANSFER_DETACHED, reason=One or more VMDKs need to be resized
2020/03/11 05:45:54.041 - #2 - 5464/4327 - StateChange: lastComputedPipeTargetsMap. copy=GroupCopy(xxxxxxxx SiteUID(0xxxxxxxxxxxxxxx) 1) to copy= GlobalCopy(SiteUID(0xxxxxxxxxxxxxxx) 0) pipe target=PT_FLUSH_CLOSE, reason=One or more VMDKs need to be resized -> PT_CLOSED, reason=One or more VMDKs need to be resized

Bir kopya görüntü erişimindeyken kaynak VMDK yeniden boyutlandırılmıştır ve görüntü erişimi devre dışı bırakılana kadar CG bu değişikliği işleyemez.

Geçici çözüm:
Etkinleştirildiği kopyada görüntü erişimini devre dışı bırakın.

Çözünürlük:
Sanal Makineler için RecoverPoint beklendiği gibi çalışıyor.