พาวเวอร์พาธ: วิธีลบ PowerPath ใน RHEL 2.1 และ 3

Summary: บทความนี้ตั้งข้อสังเกตว่า PowerPath บน Red Hat Enterprise Linux 2.1 หรือ 3 สามารถทําให้เกิดข้อขัดแย้งในการเข้าถึง SAN และบล็อกซอฟต์แวร์ที่เก็บข้อมูลได้อย่างไร สาเหตุคือโปรแกรมควบคุมและบริการ PowerPath ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

ลบ PowerPath ใน Red Hat Enterprise Linux 2.1 หรือ Red Hat Enterprise Linux 3
 

เมื่อต้องการลบ PowerPath ใน Red Hat Enterprise Linux (Red Hat Enterprise Linux) ให้ทําตามขั้นตอนต่อไปนี้:

 
SLN86166_en_US__1Note หมายเหตุ:  ในการลบ PowerPath ผู้ใช้จะต้องเข้าสู่ระบบในฐานะรูท และแอปพลิเคชันทั้งหมดที่เข้าถึงไฟเบอร์อาร์เรย์จะต้องหยุดทํางาน
  1. ใช้โปรแกรมแก้ไขข้อความเปิดไฟล์ /etc/fstab
  2. แสดงความคิดเห็นบรรทัดใด ๆ ที่อ้างอิงถึงพาร์ติชันในระบบไฟล์ที่ใช้ SAN /etc/fstab โดยวางเครื่องหมายปอนด์ (#) ที่จุดเริ่มต้นของแต่ละบรรทัด
  3. ยกเลิกการต่อเชื่อมระบบไฟล์ที่ใช้ SAN ทั้งหมด โดยพิมพ์ข้อความต่อไปนี้ที่พรอมต์คําสั่ง:
    #umount/mount_point
    โดยที่ mount_point คืออุปกรณ์ SAN
  4. ลบอุปกรณ์ PowerPath ทั้งหมดโดยพิมพ์ข้อความต่อไปนี้ที่พรอมต์คําสั่ง:
    #powermt ลบ dev=all
  5. ตรวจสอบว่าอุปกรณ์ emcpower ทั้งหมดถูกลบออกโดยพิมพ์ข้อความต่อไปนี้ที่พรอมต์คําสั่ง:
    #powermt แสดง dev=ทั้งหมด
  6. หยุดบริการ PowerPath โดยพิมพ์ข้อความต่อไปนี้ที่พร้อมท์คําสั่ง:
    #service หยุด PowerPath
  7. ตรวจสอบชื่อแพคเกจ PowerPath โดยพิมพ์ข้อความต่อไปนี้ที่พรอมต์คําสั่ง:
    #rpm -qa | grep EMCpower
    ชื่อแพคเกจ PowerPath จะปรากฏขึ้น
  8. เอา PowerPath ออกจากเคอร์เนลที่ทํางานอยู่ โดยพิมพ์ข้อความต่อไปนี้ที่พรอมต์คําสั่ง:
    #rpm EMCPower.LINUX-xxxxxx
    โดยที่ EMCPower.LINUX-xxxx-xxx คือชื่อแพ็คเกจ PowerPath
  9. อัปเดต ramdisk เริ่มต้นโดยพิมพ์ต่อไปนี้ที่พรอมต์คําสั่ง
    #mkinitrd -v -f /boot/initrd-r 'uname -r'.img 'uname -r'
  10. พิมพ์ reboot ที่พรอมต์คําสั่ง
    โฮสต์รีบูต


Cause

ไม่

Resolution

ไม่

Affected Products

Storage Networking
Article Properties
Article Number: 000132251
Article Type: Solution
Last Modified: 04 Dec 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.