Isilon:OneFS:如何为 WebGUI OneFS 7.x 和 8.x 启用 TLSv1.2 支持
Summary: 如何在 OneFS 7.x 和 8.x 中为 WebGUI 启用对 TLSv1.2 的支持 SSLProtocol - 安全套接字层协议,cp - 副本,webui - Web 用户界面。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
从 OneFS 7.2.x 和更高版本开始,OpenSSL 已升级到支持 TLSv1.2 的版本 1.0.1。
如何在 OneFS 7.2.x 及更高版本上启用 TLSv1.2:
- 通过 SSH 连接到属于系统分区的节点:
创建 的备份拷贝 /etc/mcp/templates/webui_httpd.conf 文件中定义。例如,运行类似于以下内容的命令,其中 /ifs/data/ 是应将文件复制到的目录:
# cp /etc/mcp/templates/webui_httpd.conf /ifs/data/webui_httpd.conf.bak
- 编辑
/etc/mcp/templates/webui_httpd.conf文件中定义。使用任何编辑器打开文件进行编辑。例如:
# vi /etc/mcp/templates/webui_httpd.conf <-- 或使用 # nano /etc/mcp/templates/webui_httpd.conf
- 要启用 TLSv1.2,请在
webui_httpd.conf文件中: -
SSLProtocol -all +TLSv1 -SSLv3 -SSLv2
将上面的行编辑为以下行:
SSLProtocol -all +TLSv1 +TLSv1.2 -SSLv3 -SSLv2
如果禁用任何其他协议套装,请删除 (+) 并在其前面添加 (-)。
- 进行所需更改后,保存并关闭
/etc/mcp/templates/webui_httpd.conffile - 运行以下命令,将编辑后的文件复制到
/ifs/data目录:
# cp /etc/mcp/templates/webui_httpd.conf /ifs/data/webui_httpd.conf
- 运行以下命令以将编辑后的文件复制到所有节点上的 /etc/mcp/templates 目录:
# isi_for_array 'cp /ifs/data/webui_httpd.conf /etc/mcp/templates/webui_httpd.conf'
- 运行以下命令以将更改推送到群集中的所有节点:
-
-
- 对于 OneFS 版本 7.2.x 和 8.0.0.x:
-
# isi_for_array '/etc/mcp/scripts/webui.py'
-
-
- 对于 OneFS 版本 8.0.1.x 和 8.1.x:
-
# isi_for_array '/etc/mcp/scripts/httpd.py webui'
- 通过运行以下命令,验证“+TLSv1.2”出现在所有节点上的 webui_httpd.conf 文件中:
# isi_for_array -sX 'grep SSLProtocol /etc/mcp/templates/webui_httpd.conf'
- 默认情况下,OneFS 使用最高协议套装进行协商。要仔细检查是否正在协商 TLSv1.2,请运行命令:
# isi_for_array -sX 'echo QUIT |openssl s_client -connect localhost:8080 -tls1_2 | grep -i TLS'
安装 RUP 修补程序或升级 OneFS 版本可能会覆盖
/etc/mcp/templates/webui_httpd.conf 文件中定义。如果需要,请确保在升级/修补活动后重新应用对支持的 TLS/SSL 版本的修改。
Affected Products
PowerScale OneFSProducts
PowerScale OneFSArticle Properties
Article Number: 000157890
Article Type: How To
Last Modified: 03 Dec 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.