VPLEX: Sanal birim oluşturma

Summary: Bu KB makalesinde, sanal disk bölümü oluşturmak için gereken adımlar özetlenmiştir.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

  1. Sahipsiz depolama birimlerini kontrol edin:
 VPlexcli:/> ll **/storage-volumes

/clusters/cluster-1/storage-elements/storage-volumes:
Name                                      VPD83 ID                                  Capacity  Use        Vendor  IO      Type         Thin     Provision
----------------------------------------  ----------------------------------------  --------  ---------  ------  Status  -----------  Rebuild  Type
----------------------------------------  ----------------------------------------  --------  ---------  ------  ------  -----------  -------  ---------
ESX_4                                     VPD83T3:6006048000028746073753594d303143  8.43G     used       EMC     alive   normal       true     legacy
Symm0737_0001                             VPD83T3:6006048000028746073753594d303031  8.43G     used       EMC     alive   normal       true     legacy
Symm0737_001B                             VPD83T3:6006048000028746073753594d303142  8.43G     claimed    EMC     alive   normal       true     legacy
Symm0737_001D                             VPD83T3:6006048000028746073753594d303144  8.43G     claimed    EMC     alive   normal       true     legacy
Test                                      VPD83T3:6006048000028746073753594d303041  8.43G     claimed    EMC     alive   normal       true     legacy
VPD83T3:6006048000028746073753594d303035  VPD83T3:6006048000028746073753594d303035  8.43G     unclaimed  EMC     alive   traditional  false    legacy

 

  1. İstenen depolama birimini talep edin:
VPlexcli:/> storage-volume claim --name testA -d VPD83T3:6006048000028746073753594d303035/
Claimed 1 of 1 storage-volumes.

 

  1. Depolama biriminin başarıyla talep edildiğini doğrulayın:
VPlexcli:/> ll /clusters/cluster-1/storage-elements/storage-volumes

/clusters/cluster-1/storage-elements/storage-volumes:
Name                                      VPD83 ID                                  Capacity  Use        Vendor  IO      Type         Thin     Provision
----------------------------------------  ----------------------------------------  --------  ---------  ------  Status  -----------  Rebuild  Type
----------------------------------------  ----------------------------------------  --------  ---------  ------  ------  -----------  -------  ---------
ESX_4                                     VPD83T3:6006048000028746073753594d303143  8.43G     used       EMC     alive   normal       true     legacy
Symm0737_0001                             VPD83T3:6006048000028746073753594d303031  8.43G     used       EMC     alive   normal       true     legacy
Symm0737_001B                             VPD83T3:6006048000028746073753594d303142  8.43G     claimed    EMC     alive   normal       true     legacy
Symm0737_001D                             VPD83T3:6006048000028746073753594d303144  8.43G     claimed    EMC     alive   normal       true     legacy
Test                                      VPD83T3:6006048000028746073753594d303045  8.43G     claimed    EMC     alive   normal       true     legacy
testA                                     VPD83T3:6006048000028746073753594d303035  8.43G     claimed    EMC     alive   normal       false    legacy
 
  1. Talep edilen kullanılabilir depolama birimlerinden bir kapsam oluşturun:
VPlexcli:/> extent create testA,Test

 

  1. Kapsamın başarıyla oluşturulduğunu onaylayın:
VPlexcli:/> ll /clusters/cluster-1/storage-elements/extents

/clusters/cluster-1/storage-elements/extents:
Name                                              StorageVolume       Capacity  Use
------------------------------------------------  ------------------  --------  -------
extent_Test_1                                     Test                8.43G     claimed
extent_testA_1                                    testA               8.43G     claimed

 

  1. Yerel aygıt oluşturun:
VPlexcli:/> local-device create --name testA_vol --geometry raid-1 --extents /clusters/cluster-1/storage-elements/extents/extent_testA_1,/clusters/cluster-1/storage-elements/extents/extent_Test_1 --force

 

  1. Yerel aygıtın başarıyla oluşturulduğunu onaylayın:
VPlexcli:/> ll -p **/devices

/clusters/cluster-1/devices:
Name                    Operational  Health  Block    Block  Capacity  Geometry  Visibility  Transfer  Virtual Volume
----------------------  Status       State   Count    Size   --------  --------  ----------  Size      --------------------------
----------------------  -----------  ------  -------  -----  --------  --------  ----------  --------  --------------------------
testA_vol                 ok           ok      2209680  4K     8.43G     raid-1    local       128K      -



VPlexcli:/> show-use-hierarchy /clusters/cluster-1/devices/testA_vol/
local-device: testA_vol (8.43G, raid-1, cluster-1)
  extent: extent_Test_1 (8.43G)
    storage-volume: Test (8.43G)
      logical-unit: VPD83T3:6006048000028746073753594d303045
        storage-array: EMC-SYMMETRIX-287460737
  extent: extent_testA_1 (8.43G)
    storage-volume: testA (8.43G)
      logical-unit: VPD83T3:6006048000028746073753594d303035
        storage-array: EMC-SYMMETRIX-287460737

 

  1. Sanal Disk Bölümü Oluşturma:
VPlexcli:/> virtual-volume create -r testA_vol

 

  1. Sanal disk bölümünün başarıyla oluşturulduğunu onaylayın:
VPlexcli:/> ll **/virtual-volumes
/clusters/cluster-1/virtual-volumes:
Name                        Operational  Health  Service     Block    Block  Capacity  Locality  Supporting Device       Cache Mode   Expandable  Expandable  Consistency  VPD ID
--------------------------  Status       State   Status      Count    Size   --------  --------  ----------------------  -----------  ----------  Capacity    Group        ----------------------------------------
--------------------------  -----------  ------  ----------  -------  -----  --------  --------  ----------------------  -----------  ----------  ----------  -----------  ----------------------------------------
testA_vol_vol               ok           ok      unexported  2209680  4K     8.43G     local     testA_vol             synchronous  true        0B          -            VPD83T3:6000144000000010b0026af0c08572c2


VPlexcli:/> show-use-hierarchy /clusters/cluster-1/devices/testA_vol/
virtual-volume: testA_vol_vol (8.43G, local @ cluster-1, unexported)   <-----------
  local-device: testA_vol (8.43G, raid-1, cluster-1)
    extent: extent_Test_1 (8.43G)
      storage-volume: Test (8.43G)
        logical-unit: VPD83T3:6006048000028746073753594d303045
          storage-array: EMC-SYMMETRIX-287460737
    extent: extent_testA_1 (8.43G)
      storage-volume: testA (8.43G)
        logical-unit: VPD83T3:6006048000028746073753594d303035
          storage-array: EMC-SYMMETRIX-287460737olumes


Sanal disk bölümü, depolama görünümüne eklenmediği için şu anda dışa aktarılmamış olarak görünür.

  1. Sanal birim eklemek için kullanılabilir depolama görünümlerini kontrol edin:
VPlexcli:/> ll **/storage-views

/clusters/cluster-1/exports/storage-views:
Name             Operational  initiator-ports                     virtual-volumes                                                                 port name, enabled, export status
---------------  Status       ----------------------------------  ------------------------------------------------------------------------------  ----------------------------------
---------------  -----------  ----------------------------------  ------------------------------------------------------------------------------  ----------------------------------
DELLPR510-F      ok           DELLPR510-F_HBA0                    (0,device_Symm0737_0008_1_vol,VPD83T3:6000144000000010b0026af0c085706c,8.43G),  P000000003CA00263-A0-FC02,true,ok,
                                                                  (1,ESX_4_vol,VPD83T3:6000144000000010b0026af0c08570e5,16.9G),                   P000000003CA0026A-A0-FC00,true,ok,
                                                                  (5,device_Symm0737_0007_1_vol,VPD83T3:6000144000000010b0026af0c0857071,8.43G)   P000000003CB0026A-B1-FC00,true,ok


                                                                  

  1. İstenen depolama görünümüne sanal birim ekleyin:
VPlexcli:/> export storage-view addvirtualvolume --view DELLPR510-F --virtual-volumes testA_vol_vol

 

  1. Disk bölümünün başarıyla oluşturulduğunu onaylayın:
VPlexcli:/> show-use-hierarchy /clusters/cluster-1/devices/testA_vol/
storage-view: DELLPR510-F (cluster-1)
  virtual-volume: testA_vol_vol (8.43G, local @ cluster-1, running)
    local-device: testA_vol (8.43G, raid-1, cluster-1)
      extent: extent_Test_1 (8.43G)
        storage-volume: Test (8.43G)
          logical-unit: VPD83T3:6006048000028746073753594d303045
            storage-array: EMC-SYMMETRIX-287460737
      extent: extent_testA_1 (8.43G)
        storage-volume: testA (8.43G)
          logical-unit: VPD83T3:6006048000028746073753594d303035
            storage-array: EMC-SYMMETRIX-287460737

Affected Products

VPLEX Series

Products

VPLEX Series, VPLEX VS1, VPLEX VS2, VPLEX VS6
Article Properties
Article Number: 000158420
Article Type: How To
Last Modified: 18 Sept 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.