PowerFlex 3.x Unable to power on the SVM after increasing the RAM Error memory reservation (sched.mem.min) should be equal to memsize(4096)

Summary: User had increased the RAM size from 3 GB to 8 GB.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

User had increased the RAM size from 3 GB to 8 GB.

Unable to power on the SVM after increasing the RAM
Error "Invalid memory setting: memory reservation (sched.mem.min) should be equal to memsize(4096).
An error was received from the ESXi host while powering on VM <VM name>. 
Failed to start the virtual machine.
Module 'MemSched' power on failed
An error occurred while parsing scheduler-specific configuration parameters.

kA2f10000000780CAA_3_0

Cause

This issue occurs if the virtual machine has one or more Full Passthrough (FPT) devices and if you have not configured the memory reservation or the reserved memory is not equal to the configured memory.

Resolution

To resolve this issue:
  1. Right-click the virtual machine and click Edit settings.
  2. Click the Resources tab.
  3. Select Memory and increase the reservation amount to its configured memory size.
  4. Click OK.
  5. Power on the virtual machine.
For more information, see VMware KB article 2002779
Article Properties
Article Number: 000161720
Article Type: Solution
Last Modified: 22 Aug 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.