PowerStore: Klyngenetværksvalideringsfejl – Knude A kan ikke nås fra node B via ICMP ping af oprindelig VLAN-adresse

I en ny PowerStore-implementering vender Kontrol af netværksvalidering tilbage med følgende fejl under klyngeoprettelse (ICW):

reason":{"code":"0xE0E800300010","severity":"Error","message_l10n":"The node A is not reachable from the node B via ICMP ping of native VLAN address. This will prevent NAS services from being installed.","arguments":["A","B"]},"resolution":{"code":"0xE0E800300010.resolution","severity":"Info","message_l10n":"Ensure that the physical switches are configured properly."},"applianceId":"8H02643"}, {"reason":{"code":"0xE0E800300010","severity":"Error","message_l10n":"The node B is not reachable from the node A via ICMP ping of native VLAN address. This will prevent NAS services from being installed.","arguments":["B","A"]},"resolution":{"code":"0xE0E800300010.resolution","severity":"Info","message_l10n":"Ensure that the physical switches are configured properly."},"applianceId":"8H02643"}, {"reason":{"code":"0xE0E70060000E","severity":"Warning","message_l10n":"Onboard management ports are connected to the same ethernet switch 2c:33:11:d3:a9:80.","arguments":["2c:33:11:d3:a9:80"]},"resolution":{"code":"0xE0E70060000E.resolution","severity":"Info","message_l10n":"You may cable both nodes to the same switch, if you cannot provision two management switches. But, for high availability purposes, it is recommended that you configure two switches, and connect nodes A and B of the appliance to alternate switches."},"applianceId":"8H0264

SDNAS/NAS-tjenester krævede IPv6-funktionalitet på dataswitche.
I INGEN Dell TOR er der en chance for, at IPv6 IKKE er aktiveret som krævet.

Kunde- og support-/implementeringstjenester kan arbejde sammen med netværksadministratorerne for at sikre følgende:

1. IPv6 er påkrævet aktivering til NAS-handlinger.
   Fra og med 1.0.3, SP3, bruger IPv6-kommunikationen inden for klyngen et internt fysisk lag i stedet for LACP-portkanalen. Implementering af Unified-konfiguration kræver dog stadig IPV6 på LACP til NAS-operationer.

2. Det oprindelige vlan skal også være tilladt på LACP-portkanalkonfigurationen.
   Følgende er et konfigurationseksempel, der viser andre vlan'er, der er tilladt, mens vlan-id'et er anderledes:

   interface port-channel70
     description "Connected to New SAN"
     switchport
     switchport mode trunk
     switchport trunk native vlan 999          
     switchport trunk allowed vlan 5,10,50      ==> add 999 here
     vpc 70
   interface port-channel71
     description "Connected to New SAN"
     switchport
     switchport mode trunk
     switchport trunk native vlan 900
     switchport trunk allowed vlan 5,10,50      ==> add 900 here
     vpc 71

Du kan se følgende officielle dokumentationsvejledning for yderligere netværkskrav.

https://www.dell.com/support/manuals/en-us/powerstore-1000t/pwrstrt-ntwkg/running-configuration-of-powerswitch-series-used-in-powerstore-t-model-deployments?guid=guid-efb5a236-626a-4f64-9367-b3f488405024⟨=en-us