Dell Networking OS 10에서 시작 구성 파일을 백업 및 복원하는 방법
Summary: 시작 구성 파일 startup.xml는 config 시스템 폴더에 저장됩니다. 백업 버전을 생성하려면 시작 구성을 원격 서버나 로컬 config: 또는 home: 디렉토리에 복사합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
백업 구성을 복원하려면 로컬 또는 원격 파일을 시작 구성에 복사하고 스위치를 다시 로드합니다. 사용자가 백업 구성을 다운로드한 후 reload 명령을 사용하지 않으면 재부팅할 때까지 구성이 적용되지 않습니다.
시작 구성에 파일 복사
OS10# copy {config://filepath | home://filepath |
ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |
sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath} config://startup.xml
시작 파일 백업
OS10# copy config://startup.xml config://backup-9-28.xml
백업에서 시작 파일을 복원합니다.
OS10# copy config://backup-9-28.xml config://startup.xml OS10# reload System configuration has been modified. Save? [yes/no]:no
시작 파일을 서버에 백업
OS10# copy config://startup.xml scp://userid:password@hostip/backup-9-28.xml
서버에서 시작 파일을 복원합니다.
OS10# copy scp://admin:admin@hostip/backup-9-28.xml config://startup.xml OS10# reload System configuration has been modified. Save? [yes/no]:no
Affected Products
PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4128F-ON/S4128T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S4248FB-ON /S4248FBL-ON
, PowerSwitch S5048F-ON
...
Products
S Series, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S5148F-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch S6010-ON, PowerSwitch S6100-ON
, PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON
...
Article Properties
Article Number: 000191944
Article Type: How To
Last Modified: 28 Oct 2024
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.