如何在 Dell Networking OS 10 上備份與還原啟動設定檔

Summary: 啟動設定檔 startup.xml 儲存在 config system 資料夾中。若要建立備份版本，請將啟動組態複製到遠端伺服器或本機組態：或主：目錄。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

若要修復備份組態請將本機或遠端檔案複製到啟動組態，然後重新載入交換器。使用者下載備份組態後，請輸入 reload 命令，否則配置在您重新啟動之前不會生效。

將檔案複製到啟動組態

OS10# copy {config://filepath | home://filepath |
ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |
sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath} config://startup.xml

備份啟動檔案

OS10# copy config://startup.xml config://backup-9-28.xml

從備份還原啟動檔案。

OS10# copy config://backup-9-28.xml config://startup.xml
OS10# reload
System configuration has been modified. Save? [yes/no]:no

將啟動檔案備份到伺服器

OS10# copy config://startup.xml scp://userid:password@hostip/backup-9-28.xml

從伺服器還原啟動檔案。

OS10# copy scp://admin:admin@hostip/backup-9-28.xml config://startup.xml
OS10# reload
System configuration has been modified. Save? [yes/no]:no

 

Affected Products

PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4128F-ON/S4128T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S4248FB-ON /S4248FBL-ON , PowerSwitch S5048F-ON ...

Products

S Series, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S5148F-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch S6010-ON, PowerSwitch S6100-ON , PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON ...
Article Properties
Article Number: 000191944
Article Type: How To
Last Modified: 28 Oct 2024
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.