如何在 Dell Networking OS 10 上备份和还原启动配置文件

Summary: 启动配置文件 startup.xml 存储在 config system 文件夹中。要创建备份版本，请将启动配置复制到远程服务器或本地 config： 或 home： 目录。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

要恢复备份配置，请将本地或远程文件复制到启动配置，然后重新加载交换机。用户下载备份配置后，请输入 reload 命令，否则，配置在重新启动后才会生效。

将文件复制到启动配置

OS10# copy {config://filepath | home://filepath |
ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |
sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath} config://startup.xml

备份启动文件

OS10# copy config://startup.xml config://backup-9-28.xml

从备份还原启动文件。

OS10# copy config://backup-9-28.xml config://startup.xml
OS10# reload
System configuration has been modified. Save? [yes/no]:no

将启动文件备份到服务器

OS10# copy config://startup.xml scp://userid:password@hostip/backup-9-28.xml

从服务器还原启动文件。

OS10# copy scp://admin:admin@hostip/backup-9-28.xml config://startup.xml
OS10# reload
System configuration has been modified. Save? [yes/no]:no

 

Affected Products

PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4128F-ON/S4128T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S4248FB-ON /S4248FBL-ON , PowerSwitch S5048F-ON ...

Products

S Series, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S5148F-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch S6010-ON, PowerSwitch S6100-ON , PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON ...
Article Properties
Article Number: 000191944
Article Type: How To
Last Modified: 28 Oct 2024
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.