PowerScale: Isilon: Jak zkontrolovat, zda je v systému OneFS, Linux a Windows povolen rámec JUMBO

Summary: Tento článek popisuje, jak zkontrolovat, zda je v systému OneFS, Linux a Windows povolen rámec JUMBO.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Úvod
Tento článek popisuje, jak zkontrolovat, zda je rámec JUMBO (MTU 9000) povolen pro systémy OneFS, Linux a Windows.

Procedura
  • OneFS
    • ping -D -s 8952(nebo 8972) <Cílová IP adresa>
  • Linux
    • ping -M do -s 8952(OR 8972) <Cílová IP adresa>
  • Windows
    • ping -l 8952(NEBO 8972) -f <Cílová IP adresa>
Příklad (MTU 9000) 
[root@sut14 ~]# ping -M do -s 8972 10.10.10.10
PING 10.10.10.10 (10.10.10.10) 8972(9000) bytes of data.
8980 bytes from 10.10.10.10: icmp_seq=1 ttl=64 time=0.186 ms   <<< Ping Success, JUMBO frame enabled
8980 bytes from 10.10.10.10: icmp_seq=2 ttl=64 time=0.199 ms
8980 bytes from 10.10.10.10: icmp_seq=3 ttl=64 time=0.183 ms
^C
--- 10.10.10.10 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 38ms
rtt min/avg/max/mdev = 0.183/0.189/0.199/0.013 ms
[root@sut14 ~]# 

Příklad (MTU 1500) 
[root@sut14 ~]# ping -M do -s 8972 10.10.10.11
PING 10.10.10.11 (10.10.10.11) 8972(9000) bytes of data.
ping: local error: Message too long, mtu=1500   <<< Ping Failure, JUMBO frame disabled
ping: local error: Message too long, mtu=1500
ping: local error: Message too long, mtu=1500
^C
--- 10.10.10.11 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 38ms
[root@sut14 ~]#

Affected Products

PowerScale OneFS
Article Properties
Article Number: 000194177
Article Type: How To
Last Modified: 07 Jul 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.