DLMCMDP1 RUNWAIT process ... has not finished in ... seconds timeout due to proc parm specification
Summary: One of three things is required in the cparms for the DLMCMDP1 proc - path, tlib or unit if no path, the tlib value is used, and vice versa. If none are specified, the command processor can time out. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Use recommended command processor proc DLMCPRUN.
DLMCMDP1 proc requires at least one of three specifications or it can timeout.
One of path, tlib or unit must be specified within the DLMCMDP1 proc in the CPARMS.
DLMCMDP1 proc requires at least one of three specifications or it can timeout.
One of path, tlib or unit must be specified within the DLMCMDP1 proc in the CPARMS.
Affected Products
DD for DLm8100, Disk Library for mainframe DLm2000, Disk Library for mainframe DLm2100, Disk Library for mainframe DLm2500, Disk Library for mainframe DLm8100, Disk Library for mainframe DLm8500, VNX for DLm2100, VNX for DLm8100Article Properties
Article Number: 000201101
Article Type: How To
Last Modified: 07 Nov 2022
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.